Jump to content
SAU Community

Recommended Posts

mine is at 1pm....hehe i will get there a bit earlier as well so might be able to catchup with ya mate

goodluck to both of us aye ;)

yea, ill probably see ya there... usually they are running pretty late so i should still be there at 1

and yea good luck mate, lol... i'll need it... i've never passed regency first time before... even if everything is fine they always manage to find something like a tiny leak somewhere... :(

Edited by Rocky88
+1

Once the initial raping has been carried out; If you have a list the next time you go there they will only check whats on the list.

A good question for officer Neil.

A bit like when I filed for divorce. The Magistrates Court kept sending the application back with minor edits all the time. Even made an appointment, went in and sat down with one of the admin people. Sure enough, a week later my application turned up in the mail yet again for more amendments. Grrr. They had to find one item at a time. 9 months (since the initial lodgement), 2 adjourned hearings, and more than 8 submissions later ... I'm finally divorced.

Reasons for returned divorce application ranged from:

- mispelt surname (which it wasn't, I know how to spell my own surname idiots)

- witness signature not identified as meeting requirements (it was a Proclaimed Police Officer idiots)

- affidavit of notice served not correctly filled (it was according to their first instructions)

- application missing pages, must resubmit with missing pages (pages 5 and 6 were removed by them because the ex and I had no kids to declare) Duh!

- affidavit of notice served in person not correctly served (did not serve to ex-wife - she authorised it to be served to a third party idiots)

- cheque for fee not enclosed (umm, yes it was, try again!)

- affidavit of notice served via mail (one tiny little boxed was not ticked - could have advised me earlier)

There must be some real bright sparks working in the Courts :)

Fail.

Edited by RubyRS4
i got done for tyres. all 4 had worn the inside edge out unknowingly!?!?! plus they were borrowed tyres while mine get re-rolled. the cops were at strath this morning(big set up like 5-10 bikes, had a r33 pulled over on the opposite side and were pulling everyone over inc bikes). they were good, open and honest. not attitude at all. told me things to make sure i check before i in for my inspection.

4 years and first actual run in with them.

Update, got it cleared yesturday night after work. so tis all good again

Booked my revisit for Thursday at 3:40. Gonna take it to the cop shop so I can atleast drive it. If I go down there with a hi-flow cat and its loud, will they defect me for it? Or will they just put it on the hoist and check off the stuff I failed for the first time? This baffle plate cannot be good for this car, its so slow the turbo barely spools.

go to your local hardware store Rok and get a 4mm T piece

lol the car is all good to go tomorrow...hopefully it passes first time

how did u go m8? ...i failed  :D

ride height was apparently too low even tho its stock and i passed with exactly same suspension setup 2 months ago... then apparently blue globes are illegal - wtf... and a little piece of rubber that goes onto engine mount had a small crack on it...

i know i shouldnt, but i lost my temper and told the guy that it all bs... he also wanted to defect me for not having all 4 screws in my front number plate, but i got so pissed off at him that he asked for second opinion and eventually let it go...

i swear regency is fkn tough now...

sorry mate, didnt have much time to talk to u there... i was late coz i got locked in my own backyard lol

Edited by Rocky88
how did u go m8? ...i failed :D

ride height was apparently too low even tho its stock and i passed with exactly same suspension setup 2 months ago... then apparently blue globes are illegal - wtf... and a little piece of rubber that goes onto engine mount had a small crack on it...

i know i shouldnt, but i lost my temper and told the guy that it all bs... he also wanted to defect me for not having all 4 screws in my front number plate, but i got so pissed off at him that he asked for second opinion and eventually let it go...

i swear regency is fkn tough now...

sorry mate, didnt have much time to talk to u there... i was late coz i got locked in my own backyard lol

Yeah, they are getting really really picky. I think everyone should really try to avoid having over the top mods on their car, Regency has just gotten that bit more stricter resulting in $1,000's to just get the car there only to fail it again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...