Jump to content
SAU Community

Recommended Posts

After seven years of owning an import i got defected today. Was going to happen sooner or later.

Exhaust to load supposedly even though he didnt test it

After market stering wheel

Front bar not secure.

Ah well. Anybody got some r32 rims or wheel for sale :P

That's bullshit that they can just assume your exhaust is too loud. Just like the 'suspicioun of defect' arguement.

Although, 7 years is a good run for no defect!

got pulled over the other night...cop on a bike...reason for pulling me over was that i had stockies on the back...i explained that they have at least 90% tread...which they did....and theyve been on the car for over 8 months..through RBT's and stuff like that and never had a problem.....oh well....i told him the other 17's were going back on the next day...which they were anyway...he then did a lisence check....and checked my tint...when i got my windows done after winning that voucher from the old school and new age car show...i asked for darkest LEGAL tint.....problem being..is the fronts are the same as the backs...70%...he couldve done me for that...he then proceede to shake the absolute crap out of the drivers seat and say..in his words "completely f**ked"....im thinking...this is the original 21 year old seat that came with the car....what do you expect....its not a VE commodore ffs....he then asked me to pop the bonnet :P ...looked over the engine bay...the front mount..and said "so..when are you gonna get this legal??"...i just said..that im trying to...its just expensive....he picked on untidy wiring....hoses not blocked off..which was from my fuel reg which shat itself an hour earlier.....he let me go with a warning and said if he sees it on the road again..he'll defect it...he couldve also done me for handbrake if he tried it...it goes up 2 clicks and it isnt even connected to the calipers.....so now ive tidied up the engine bay wiring...got my 17's on the back...and when i have time ill sort the tint and handbrake out....im getting a pair of seats off a mate cheap too....oh and put in one of those forms to modify my vehicle...and yes...i know how lucky i am

not worth shit. you can still get defected with the modified vehicle plates or whatever the hell the end result is. just like engineers reports, not worth a damn thing. makes it easier to pass regency in nugz's case, yes, but practically useless for everyone else.

not worth shit. you can still get defected with the modified vehicle plates or whatever the hell the end result is. just like engineers reports, not worth a damn thing. makes it easier to pass regency in nugz's case, yes, but practically useless for everyone else.

I've filled out those Application to Modify forms many times when it came to my CA18DET 1600 and SR20 supercharged 200B. Its a form where you basically state what modifications you have or intend to have. Lodge it, and you'll be sent a list of requirements for any engineer to certify. I know when I did the CA18DET conversion they requested a chassis strength test, brake upgrade balance test etc. Cost me like $1000 to get the Engineer to certify all that. I remember it was a nightmare getting approval for my adjustable radius rods and control arms, roll cage, and massive 330mm brake upgrade on the 1600, then there was the top-mount VG30BB.

When I did my SR20 supercharged conversion to the 200B, I didn't need the chassis strength test for whatever reason. But it had to have a Regency inspection for brake upgrade, wiring etc ... without needing an Engineers report. The inspectors were doubtful, but they passed it. Mostly because I filled the forms required and I was trying to do the right thing.

I've never been questioned on those cars ...

However I did get another 200B defected before that. Had a L20B punched out to 2.2 litres, big cams, twin webbers, big brakes etc. Had an Engineers report, but the two bike cops wanted to defect me anyway. They couldn't touch a thing on the list, so they did me for tyres (80% at the time btw) which was rubbish, and put me down for a Regency inspection. Drove straight to the cop shop, showed them my eng cert and the rubbish defect. They promptly removed it immediately without charge. I had the right documentation to go with my car, and they had no right to defect it.

The short answer is: if you have submitted an application to modify and have the mods approved/certified, then the cops should be satisfied with what is on the list.

i was gonna try on the thing where i pulled out my papers saying my car passed regency...which it did..5 and a half years ago....when i was std....but the modified vehicle tag thing came in before that..(just read that)...oh wells.....i reckon he let me go cos he saw how badly i was shaking when i handed him my lisence

Lucky man Nugzy.

Regency pinged me for my old 323's driver seat. It's like a 22 year old car and the drivers seat was slightly wobbly. They're like "this can come loose in a crash and kill everyone and throw you through the windscreen and cause obscene amounts of damage".

So I got another sticker and had to get a 'new' seat from U-Pull-It lol.

Put the car back through, when they wobbled the new seat, they wobbled it stupidly hard... could have broken it again just from that inspector.

I mean cummon... I'm not using a inflatable chair or a deck chair as a f**king drivers seat! The backrest was slightly wobbley... WOW!

exactly what this guy did....i mean the seat is on the way out....its worn through where my arse rubs on the side when i get in....im just getting some turbo exa seats...no rips, tears, or marks...just need a clean and a dry out...$50 for the pair

Lucky man Nugzy.

Regency pinged me for my old 323's driver seat. It's like a 22 year old car and the drivers seat was slightly wobbly. They're like "this can come loose in a crash and kill everyone and throw you through the windscreen and cause obscene amounts of damage".

So I got another sticker and had to get a 'new' seat from U-Pull-It lol.

Put the car back through, when they wobbled the new seat, they wobbled it stupidly hard... could have broken it again just from that inspector.

I mean cummon... I'm not using a inflatable chair or a deck chair as a f**king drivers seat! The backrest was slightly wobbley... WOW!

Its funny that the seat belt (preventing you from exiting thru the windscreen) is not part of the seat assembly.

There is however the concern about back injury if you're hit hard from behind and the backrest part of the seat collapses.

I'm really considering fitting aftermarket seats in the car. Anyone know of any ADR approved fixed back seats?

Its funny that the seat belt (preventing you from exiting thru the windscreen) is not part of the seat assembly.

There is however the concern about back injury if you're hit hard from behind and the backrest part of the seat collapses.

I'm really considering fitting aftermarket seats in the car. Anyone know of any ADR approved fixed back seats?

For you to be able to use aftermarket seats i think they have to be ADR approved reclineable using ADR approved rails etc.....well so what i have heard/found

For you to be able to use aftermarket seats i think they have to be ADR approved reclineable using ADR approved rails etc.....well so what i have heard/found

I think its silly that you are more commonly expected to replace a (say) 15 year old R33 seat with another 15 year old seat. To fit a new (aftermarket) seat, you need to jump thru hoops. To my knowledge, there is only one brand of reclinable seat with ADR approval?

I had fixed back seats in my 1600, but I had that engineered anyway (to go with the roll cage - needed a certain head-to-cage clearance), and can't recall the details of getting it approved. BUt as far as I recall, reclinables were not an option. It had to be fixed back seats.

There is however the concern about back injury if you're hit hard from behind and the backrest part of the seat collapses.

....if your hit hard from behind...im pretty sure the last thing going through your mind is the seat your in.....or the position your in if your in MUDHNTR

it seems logical to me that:

2 door: ADR approved reclinable seat for compliance/or fixed back seat, back seat removed and registered as a 2 seater.

4 door: ADR approved fixed back or reclinable seat can be used.

but, often the logical is not legal.

it seems logical to me that:

2 door: ADR approved reclinable seat for compliance/or fixed back seat, back seat removed and registered as a 2 seater.

4 door: ADR approved fixed back or reclinable seat can be used.

but, often the logical is not legal.

your pretty much spot on there Damo...well at least thats how i think it should be done....seats and ADR approval and all are as clear as Murray River Water.....Give vehicle standards a call ruby.....they are great people and give you a proper answer first time everytime....they know what they are talking about...and also according to them your black dragon is slower then the over coloured dragons

Does anyone know where you can find a list of ADR approved aftermarket items???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...