Jump to content
SAU Community

Recommended Posts

Pair of grey East Bear seats

These have been used for about 2 months...mint condition.

Comes with driver s13 rail (Bride) (no passenger rail)

$1200

0403537942

apparently they are made in the same factory as the R34 GTR seats.

They are the same shape, but the material is different. It is very durable, wont wear or rip easily. And of course East Bear are top Jap brand

They are also semi/track street..kind of like GTR seats. A nice bucket however they arent uncomfortably hard like a pure race seat.

http://www.nengun.com/east-bear/sigma-reclining-seats <---some photos here.

the east bear ones are great i had a set. those copies look a bit longer in the back which would be good for the taller people.Shame about the embroidery. I got a s13 14 rail if you want it ricca

Do you know if they are certified for racing?

Save your money and buy a Sparco/Bride/Recaro/Cobra etc.

I dont know that i would trust a cheapy seat like that in an impact. Cheap for a reason is my opinion.

those seats from autopro, auto1, supercheap. comes with universal rails BUT do not fit GTT R34.

asked around places in Perth for rails for R34 and only place is in eastern states, and they usually go for $250ish for one not including sending over to Perth. (and there heavy so sending would cost abit too)

Save your money and buy a Sparco/Bride/Recaro/Cobra etc.

I dont know that i would trust a cheapy seat like that in an impact. Cheap for a reason is my opinion.

I haven't been able to find any that I like/fit me which is why I've stuck with the GTR seat for now.. I might just get a harness to start with and keep the GTR seat in the meantime.

Gay thing is, the mrs hates anything but the stock gtst seat.. so I have to have mismatched seats :D

Edit: guess that makes upgrades cheaper :yes:

Edited by bubba
I haven't been able to find any that I like/fit me which is why I've stuck with the GTR seat for now.. I might just get a harness to start with and keep the GTR seat in the meantime.

Gay thing is, the mrs hates anything but the stock gtst seat.. so I have to have mismatched seats :banana:

Edit: guess that makes upgrades cheaper :yes:

New GF time, she gets what you give her

/backhand

:D

the east bear ones are great i had a set. those copies look a bit longer in the back which would be good for the taller people.Shame about the embroidery. I got a s13 14 rail if you want it ricca

Just posting it up dude got no $$ :yes: lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...