Jump to content
SAU Community

Recommended Posts

I was caught making unnecessary noise and smoke from a set of traffic lights in Nerang. The infringment notice has an error on it.In the body type section, the officer wrote sedan instead of coupe. Does this make the ticket invallid, or should I just pay the fine?

Link to comment
https://www.sau.com.au/forums/topic/248455-error-on-infringment-notice/
Share on other sites

I was caught making unnecessary noise and smoke from a set of traffic lights in Nerang. The infringment notice has an error on it.In the body type section, the officer wrote sedan instead of coupe. Does this make the ticket invallid, or should I just pay the fine?

you should write him up a ticket for not being able to tell the difference

I was caught making unnecessary noise and smoke from a set of traffic lights in Nerang. The infringment notice has an error on it.In the body type section, the officer wrote sedan instead of coupe. Does this make the ticket invallid, or should I just pay the fine?

id just pay it dude

what else can you do? take it to court? and use "my car isnt a sedan" as an excuse for your infringement?! then court cases just for that?

just be done with it and dont do it again.....

I've read somewhere that that sort of thing would make a ticket invalid if there was more than three errors

If you notify them they will confirm other details with the officer that issued the ticket and correct the ticket and issue another infringement.

I'd suggest paying it , unless of course there is more than 1 error that is quite substantial the officer in this case doesnt know his cars and will simply tell the road authority that he thought it was a sedan of sorts and have his screw up fixed up :D

same thing used to go with birth dates and names if u are asked for your name dob etc and u tell them incorrectly they'll get you for giving false information however if the police officer makes the mistake and misreads misinterprets or guesses something they can turn around and fix it up later on :D wierd how that works huh

ummm...check your rego and what it classes you car as. Sometimes they class them as a coupes only if the back window lifts up with the boot.

then again it could just be a massive mistake...put it this way i drive a sedan and its registered as a coupe...dont know how that happened.

i had a similar incident. got a parking ticket for parking in a bus stop for 10mins. under Car Description, he wrote grey nissan coupe. MY car is dead set BLUE with a PURPLE shade (not remotely close to any sort of a grey) lol. i was going to take it to court and argue technicality, and also attack the ability and reliablity of a person to issue fines, when he cannot differentiate between blue and grey lol. BUTTTTT i had exams and didnt have the time to pursue it, so i just paid it :D

^^^ A lot of people have that degree of colour blindness.

Main Entry: se·dan

Pronunciation: \si-ˈdan\

Function: noun

Etymology: origin unknown

Date: 1635

1: a portable often covered chair that is designed to carry one person and that is borne on poles by two people

2 a: a 2- or 4-door automobile seating four or more persons and usually having a permanent top — compare coupe b: a motorboat having one passenger compartment

Don't be silly, pay it.

English.. it's my language.

Edited by madbung

I once got booked at Wentworth Falls doing 60Km/Hr in a 50Km zone, but Mr Plod wrote out the ticket with the Number Plate of the car in front of me (and not mine).

I took it to court, just wondering if I could get off on a technicality. But alas, the magistrate determined that because I was the driver of the car that was speeding, I still had to pay and lose pts.

I must admit too that I represented myself; which means that I had a fool for a client!!!

Tez

He could have written "helicopter" in the vehicle panel and it wont make any difference.

In court technical details do matter, but it can't be something tiny that will get you off on a "technicality".

it is a sedan mate. but sure take it to court. it will be awesome fun when you try to explain it to them. video and youtube it.

and even if he wrote sudan under body type it wouldn't matter. in no way does it have any impact on the validity of the ticket.

Take it to court and they will thank you for pointing out the error. They will then correct the error and charge you a court fee and probably an increased fine for wasting their time..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
×
×
  • Create New...