Jump to content
SAU Community

Recommended Posts

for the local ppl of sydney there was the supernats event held at eastern creek yesterday, i didnt go but hav heard it was pretty good. wat worries me is the setup the cop/rta/epa had there. friend of mine got done for speeding, noisy zorst, leaking power steering and horn not working, total $450 fine. and he reckons he was 1 of the lucky ones there compared to the other cars waiting to be inspected.

apparently there was about 4 or 5 test stations there which once ur pulled over u hav to go through, and at a event like that, wat kind of cars and fans wud u expect to rock up...mmmm. it was a feeding frenzy for the cops. did anyone get caught up in this mess ??

i kno cops cant do a RBT within a certain distance of pubs, so duz a similar rule apply in this instance ?? probably not.

don't wanna go into detail but my car is full of defects !!! so wat is there left for enthusiusts like us ???

Link to comment
https://www.sau.com.au/forums/topic/24933-concerning-thoughts/
Share on other sites

Originally posted by jvs007

so wat is there left for enthusiusts like us ???

buy a bicycle and let the goverment suffer from not having any defects/speeding fines!

now that would stuff them all up

but hopefully this country changes before something that drastic needs to happen

i hope

Originally posted by 2fardown

Fix the defects or be prepared to get a fine.  Quite simple really.

Thats right... simple.

If the cops think they can outsmart all the car enthusiasts by seting up these "test stations" outside car events (of all places), then outsmart them by making sure your car is tip-top... or don`t go to the event in a defective car.

I can assure you all that there is absolutely nothing more satisfying than having your car gone over by the transport dept. and the cops...3 time and still they find nothing...the whole time I just sat against the front guard talking on my phone and occasionally asked "have you lot finished wasting my time" the best feeling I gaurantee :) Yes it cost to get it right but it is worth every cent.

i understand the idea of fixing defects so u dont get fined for them but my point is who sets these rules ???

ever seen a engineer try to put sumthing togetha on paper but the technician laughs at the idea in practice (no offence to engineers)

ever seen tech books where the typist types stuff down he/she doesnt know about and makes mistake (no offence to typist)

surely sum1 can agree that some of the rules are really silly and not practical ???

end of the day i do realise rules are rules and u gotta follow them so i dont need ppl telling me that but i am just after sum thoughts of others about this issue

The problem with mods is that there is one rule for all cars for example they say that it is against the law to lower a car more than 100mm from the ground unless it is like that as standard now for a lot of cars you can easilly go beyond 100mm and still drive it like my mates old EK Civic which was defected at 45mm off the deck...you could still turn lock to lock without interfearence and the suspension could still travel without bottoming out yet it was still "Illegal" Unless there was a rule for every single different car on the market then we have to either do the right thing of hope not to get caught...the later is the option I normally choose and have done well in my years of driving modded cars, the key is to not take your car where there is a likelyhood of you being pulled by the cops...like at a "Car event"

I remember leaving last years Jamboree in QLD in my line with NO exhaust apart from my 4" dump and front pipe...it was way loud and there was a cop parked just after the entrance, I remember thinking "Dam here we go" now it would have been my fault if I had been caught...lucky I had enough speed up to just coast past him and down the road...but I would have had no one to blame had I been caught....

On a side note :) Don't try driving like this for more than a few minutes, it was a 70 minute drive home at 10pm, by the time I got home my head was thumping :) Sounded sweet though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...