Jump to content
SAU Community

R32 Gtr Running Hot After Coolant Change

black sky

By black sky,
in Engines & Forced Induction

 Share

Recommended Posts

black sky Rising Star

black sky

Posted
Posted (edited)

Hi Guy's

I changed my coolant since the old water was rusty as sh!t. i put in the coolant stuff blead the system and now the temp when driving sits at over 90 on my power fc. The needle doesn't go up above half way on the dash but still it makes me worried.

What's the proper way to blead the gtr coolant lines and is there something else i need to do??

and also my heater is no where near as hot as it usually is when i have it on 32 degrees

any help would be great

Edited by black sky
black sky Rising Star

black sky

Posted
  • Author
Posted (edited)

when i did the change i forgot to put the heater on, but now i've blead it for ages and it still overheats. is there only the one blead point on the GTR??

so should i just keep bleading it???

and the heater isn't working at all even with the engine at 95 degrees it still blows cold air.

cheers anthony

Make sure you have the heater on while you are doing the bleeding....helps get all the air out of the heater core. Sounds like thats where you went wrong.
Edited by black sky

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a good German place in Brisbane if youre up for the drive 😛
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
×
×
  • Create New...