Jump to content
SAU Community

Recommended Posts

I bought them for last year as I was doing ridiculous kays in my car. In short, no. They're not very good. They tend to wear reasonably well but if you want a performance tyre, look elsewhere.

They do smoke up quite well though :D

230703JPM_030.jpg

Adrian

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-530959
Share on other sites

I'm on my second set, and I only replaced the first because I was concerned how they would go in a RWC.

I've got good mileage out of them (20k+), including some time on the race track (club sprints only). They don't like being caned (as on the track), but as a general on-road high performance tyre, I've yet to fault them.

They're probably not as good overall as Bridgie 520s or whatever those Bridgies are on the HSVs, but those Bridgies are not twice as good (I think they cost about twice as much).

A good bang-for-your-buck performance tyre, IMHO.

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-531225
Share on other sites

i have falken ze502's on the rear of mine. they have some nice grip, but wear quite quickly - ive only gotten 10,000k's outa mine :) and they cost 320 each aswell :)

back to topic : i havent heard anything about these tyres gloof

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-531408
Share on other sites

That's cheap for ZE-326. I remember when I got mine they were like $180. For the price you pay for them, they are pretty good. As everyone said, not much grip when launching but alright for just street tyres.

The good thing is that these tyres are none directional so I can swap my tyres without been refited when it start wearing out on the inside shoulder. Hasn't happen yet but on my old tyres my front were wearing on the inside shoulder.

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-537144
Share on other sites

The good thing is that these tyres are none directional so I can swap my tyres without been refited when it start wearing out on the inside shoulder.

You will still have to refit them. Otherwise, if you just swap the wheels, you'll have the tyre on the other side of the car, turning the other way, but still wearing the inside. :burnout:

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-539638
Share on other sites

Yeah that's what I mean swaping wheels altogether, so would be inside out with the wore shoulder outside and the better shoulder inside. This would balance it out abit. And when the inside start wearing again, i'll swap it again hehehe.

Don't know how many time I'll be able to swap them around for haha.

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-541579
Share on other sites

They're reasonable all around tyres for the price.. So if that is what you're after, go for it. If you're doing heaps of burnouts or mucking around probably going to be fine for that.

Meant to have greater life than the ze502's, but less grip. Nothing terrible, but they only gave me a bit more traction than my old Simex I think :D

Personally, while i bought those tyres due to recommendations on here - i'd try something different. They are cheap though :(

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-545975
Share on other sites

Hi, I've got some Falken ZE -502(205/55/16) on My R32 gts4 had them since April

got them from quickfit for $600 for set fit&bal. They are ok, but squeal easier then than the BFGoodrich radial TA's i had before.

The Falkens are better steering tires than the goodriches but have less traction than goodriches on the rears.i.e. going around small roundabouts in the wet, falkens hold line, goodriches run wide-understeer! like crazy.

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-550110
Share on other sites

What speed rating are the ST115? I had a look at the American site and some seemed to be V or W rated, but most had no speed rating listed at all. And what does Treadwear 360, Traction A, and Temperature A mean?

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-550670
Share on other sites

well, treadwear is a comparative number for how long the tyre will last, not sure about what the scale is tho. traction and temperature I'm not sure about

.....it would be great if we could get a tyre expert on these forums :)

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-556118
Share on other sites

I think the ST115's are softer than the ZE326's, which would mean that the higher the number, the softer it is? My girlfriend's Nankang EX601's have a treadwear of 320, and they last a pretty long time. I can't imagine the ST115's lasting any longer than that.

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-556280
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...