Jump to content
SAU Community

Recommended Posts

I bought them for last year as I was doing ridiculous kays in my car. In short, no. They're not very good. They tend to wear reasonably well but if you want a performance tyre, look elsewhere.

They do smoke up quite well though :D

230703JPM_030.jpg

Adrian

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-530959
Share on other sites

I'm on my second set, and I only replaced the first because I was concerned how they would go in a RWC.

I've got good mileage out of them (20k+), including some time on the race track (club sprints only). They don't like being caned (as on the track), but as a general on-road high performance tyre, I've yet to fault them.

They're probably not as good overall as Bridgie 520s or whatever those Bridgies are on the HSVs, but those Bridgies are not twice as good (I think they cost about twice as much).

A good bang-for-your-buck performance tyre, IMHO.

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-531225
Share on other sites

i have falken ze502's on the rear of mine. they have some nice grip, but wear quite quickly - ive only gotten 10,000k's outa mine :) and they cost 320 each aswell :)

back to topic : i havent heard anything about these tyres gloof

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-531408
Share on other sites

That's cheap for ZE-326. I remember when I got mine they were like $180. For the price you pay for them, they are pretty good. As everyone said, not much grip when launching but alright for just street tyres.

The good thing is that these tyres are none directional so I can swap my tyres without been refited when it start wearing out on the inside shoulder. Hasn't happen yet but on my old tyres my front were wearing on the inside shoulder.

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-537144
Share on other sites

The good thing is that these tyres are none directional so I can swap my tyres without been refited when it start wearing out on the inside shoulder.

You will still have to refit them. Otherwise, if you just swap the wheels, you'll have the tyre on the other side of the car, turning the other way, but still wearing the inside. :burnout:

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-539638
Share on other sites

Yeah that's what I mean swaping wheels altogether, so would be inside out with the wore shoulder outside and the better shoulder inside. This would balance it out abit. And when the inside start wearing again, i'll swap it again hehehe.

Don't know how many time I'll be able to swap them around for haha.

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-541579
Share on other sites

They're reasonable all around tyres for the price.. So if that is what you're after, go for it. If you're doing heaps of burnouts or mucking around probably going to be fine for that.

Meant to have greater life than the ze502's, but less grip. Nothing terrible, but they only gave me a bit more traction than my old Simex I think :D

Personally, while i bought those tyres due to recommendations on here - i'd try something different. They are cheap though :(

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-545975
Share on other sites

Hi, I've got some Falken ZE -502(205/55/16) on My R32 gts4 had them since April

got them from quickfit for $600 for set fit&bal. They are ok, but squeal easier then than the BFGoodrich radial TA's i had before.

The Falkens are better steering tires than the goodriches but have less traction than goodriches on the rears.i.e. going around small roundabouts in the wet, falkens hold line, goodriches run wide-understeer! like crazy.

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-550110
Share on other sites

What speed rating are the ST115? I had a look at the American site and some seemed to be V or W rated, but most had no speed rating listed at all. And what does Treadwear 360, Traction A, and Temperature A mean?

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-550670
Share on other sites

well, treadwear is a comparative number for how long the tyre will last, not sure about what the scale is tho. traction and temperature I'm not sure about

.....it would be great if we could get a tyre expert on these forums :)

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-556118
Share on other sites

I think the ST115's are softer than the ZE326's, which would mean that the higher the number, the softer it is? My girlfriend's Nankang EX601's have a treadwear of 320, and they last a pretty long time. I can't imagine the ST115's lasting any longer than that.

Link to comment
https://www.sau.com.au/forums/topic/24979-falken-ze326/#findComment-556280
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...