Jump to content
SAU Community

Recommended Posts

Thanx guys, I do like the look of the r32 -> (looks more like the r34) Will be test driving the R32 GTS4 today. With features regarding safety , it has ABS which is a big plus in my books.

It is pretty stock under the bonnet but previous owner is a GTR enthusiast and has modified the interior and exterior accordingly. Will have to test drive r33's for comparison but sounds like the general consensus is that the R32 provides a good mix of performance, quality, looks and handling.

Pentae, you've quoted GTS-t power but GTR weight there. Actually even then I think they're too heavy, Motortraders says the R32 GTR is only 1430kg, and R33 1530kg. If the figures you quoted were really for a GTS-t, they would run into the 16's I reckon :D Also only the S13 1.8T Silvias are 1140kg or so. S14 2.0T are around 1220kg.

Anyone curious about power, weight, and standard features of grey imports should have a look at Motortraders Network. It might not be 100% accurate, but I think it's pretty close, and it's definitely the most comprehensive list of these cars and their features that I've seen.

XPL_Vspec, here are some other things to consider when comparing the R32 with R33.

The R33 has, compared to R32:

Bigger injectors

Better flowing engine head (it's not all just about the extra 500cc)

Stonger gearbox

Better brakes (except for compared with R32 Type M, which are about the same)

Smaller boot space (battery is in boot, along with a lot of HICAS gear)

More room

More weight

If you plan on upping the power, the R33 is probably a better base to start with. However, if you can pick up a bargain on an already modified R32, that may be the way to go. Especially if you can find one that has already had an RB25 conversion with gearbox.

I would also like to point out that Nobody has mentioned yet that the R32 is about 5-8k cheaper.. for those of you saying 'the r33 is a more powerful base to start with..' how does the r32 compare as a base to start with after you've used the money you've saved on mods?

I'd rather a totally decked out r32 gtst with 8k of performance mods than a stock r33.

Originally posted by pentae

I would also like to point out that Nobody has mentioned yet that the R32 is about 5-8k cheaper.. for those of you saying 'the r33 is a more powerful base to start with..' how does the r32 compare as a base to start with after you've used the money you've saved on mods?

I'd rather a totally decked out r32 gtst with 8k of performance mods than a stock r33.

Wasn't it only me that said that?

Ok, if you start with a stock R32, to bring up to similar spec (hp handling-wise) as an R33 you will need:

Bigger injectors $200?

Bigger brakes $500?

RB25 box and engine $3000?

Laber to fit all the above $1000?

That $8k is already half used up and you haven't even done anything to the power yet. Plus all the time off the road to put it all in. Like I said, if you want an R32 it's probably better to find one with some or all of the above mods already done, unless you plan on keeping it stock. Or just go the whole hog and get a GTR.

I would rather an R32 GTS-t with $8k of performance mods than a stock R33 GTS-t too. But that is assuming that the choices are as black and white as that. They aren't.

Edit: And this is assuming you can even get an R32 for $8k less. I just had a quick look in the trading post and the cheapest R32 GTS-t I could find is $14k. Average around $16k. At least they are holding their value pretty well.

Can someone confirm that Type M R32's are the only R32's with 4 piston calipers? Ive never seen an R32 that has the 2spot front brakes, does that mean the vast majority of R32 GTSTs in Aus are type M?

Originally posted by XPL_Vspec

Thanx guys for your input. If i was to get an r32 completely stock under the hood, what would the first thing you guys would do? maybe less than $1500 - $2k worth of mods?

Full 3 inch exhaust, including cat and front and dump pipes

Probably wouldnt bother with a pod filter, just get an aftermarket element.

???

No need for bigger injectors unless u're going after big HP like 200RWKW+

Bigger Brakes? - R32 Type-M brakes are almost identical to R33 brakes.

RB25Box I can understand this cause the RB20DET box has problems with big HP.

RB25Engine? - mate its only 27kW or so diff between the two DET engines and the 32 is a slightly lighter car.

Originally posted by JimX

Wasn't it only me that said that?

Ok, if you start with a stock R32, to bring up to similar spec (hp handling-wise) as an R33 you will need:

Bigger injectors $200?

Bigger brakes $500?  

RB25 box and engine $3000?

Laber to fit all the above $1000?

That $8k is already half used up and you haven't even done anything to the power yet. Plus all the time off the road to put it all in. Like I said, if you want an R32 it's probably better to find one with some or all of the above mods already done, unless you plan on keeping it stock. Or just go the whole hog and get a GTR.

I would rather an R32 GTS-t with $8k of performance mods than a stock R33 GTS-t too. But that is assuming that the choices are as black and white as that. They aren't.

Edit: And this is assuming you can even get an R32 for $8k less. I just had a quick look in the trading post and the cheapest R32 GTS-t I could find is $14k. Average around $16k. At least they are holding their value pretty well.

I can't figure out why people choose their cars based on how common they are. Do you really care that much about what other people think?

Yer, people are silly choosing a car on that basis. If you look at it that way then ANY skyline is common, except maybe for an R34 GTR or something.

They are much of a muchness in terms of most things and everything seems to balance out a bit.. and don't forget being "more common" for a 33 is often a good thing, means parts and advice might be more readily available.

Personally I think this 'common' argument is a little specious.

GTS Skylines are cheap performance cars. For less than $20,000 you're not gonna get a whole lot of exclusivity.

Even twice that for a GT-R isn't gonna get you into some sort of "LOOK AT ME, I CAN DUST FERRARI's" fraternity.

I was looking for power, handling, braking, size (yes I like BIG cars), reasonably cheap mods and a big cabin (show me a bigger coupe interior).

The 33 is really close enough. I really want that 33 GT-R - it's not twice as good but I'll be willing to pay the price to find out.

T.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...