Jump to content
SAU Community

Recommended Posts

Thanx guys, I do like the look of the r32 -> (looks more like the r34) Will be test driving the R32 GTS4 today. With features regarding safety , it has ABS which is a big plus in my books.

It is pretty stock under the bonnet but previous owner is a GTR enthusiast and has modified the interior and exterior accordingly. Will have to test drive r33's for comparison but sounds like the general consensus is that the R32 provides a good mix of performance, quality, looks and handling.

Pentae, you've quoted GTS-t power but GTR weight there. Actually even then I think they're too heavy, Motortraders says the R32 GTR is only 1430kg, and R33 1530kg. If the figures you quoted were really for a GTS-t, they would run into the 16's I reckon :D Also only the S13 1.8T Silvias are 1140kg or so. S14 2.0T are around 1220kg.

Anyone curious about power, weight, and standard features of grey imports should have a look at Motortraders Network. It might not be 100% accurate, but I think it's pretty close, and it's definitely the most comprehensive list of these cars and their features that I've seen.

XPL_Vspec, here are some other things to consider when comparing the R32 with R33.

The R33 has, compared to R32:

Bigger injectors

Better flowing engine head (it's not all just about the extra 500cc)

Stonger gearbox

Better brakes (except for compared with R32 Type M, which are about the same)

Smaller boot space (battery is in boot, along with a lot of HICAS gear)

More room

More weight

If you plan on upping the power, the R33 is probably a better base to start with. However, if you can pick up a bargain on an already modified R32, that may be the way to go. Especially if you can find one that has already had an RB25 conversion with gearbox.

I would also like to point out that Nobody has mentioned yet that the R32 is about 5-8k cheaper.. for those of you saying 'the r33 is a more powerful base to start with..' how does the r32 compare as a base to start with after you've used the money you've saved on mods?

I'd rather a totally decked out r32 gtst with 8k of performance mods than a stock r33.

Originally posted by pentae

I would also like to point out that Nobody has mentioned yet that the R32 is about 5-8k cheaper.. for those of you saying 'the r33 is a more powerful base to start with..' how does the r32 compare as a base to start with after you've used the money you've saved on mods?

I'd rather a totally decked out r32 gtst with 8k of performance mods than a stock r33.

Wasn't it only me that said that?

Ok, if you start with a stock R32, to bring up to similar spec (hp handling-wise) as an R33 you will need:

Bigger injectors $200?

Bigger brakes $500?

RB25 box and engine $3000?

Laber to fit all the above $1000?

That $8k is already half used up and you haven't even done anything to the power yet. Plus all the time off the road to put it all in. Like I said, if you want an R32 it's probably better to find one with some or all of the above mods already done, unless you plan on keeping it stock. Or just go the whole hog and get a GTR.

I would rather an R32 GTS-t with $8k of performance mods than a stock R33 GTS-t too. But that is assuming that the choices are as black and white as that. They aren't.

Edit: And this is assuming you can even get an R32 for $8k less. I just had a quick look in the trading post and the cheapest R32 GTS-t I could find is $14k. Average around $16k. At least they are holding their value pretty well.

Can someone confirm that Type M R32's are the only R32's with 4 piston calipers? Ive never seen an R32 that has the 2spot front brakes, does that mean the vast majority of R32 GTSTs in Aus are type M?

Originally posted by XPL_Vspec

Thanx guys for your input. If i was to get an r32 completely stock under the hood, what would the first thing you guys would do? maybe less than $1500 - $2k worth of mods?

Full 3 inch exhaust, including cat and front and dump pipes

Probably wouldnt bother with a pod filter, just get an aftermarket element.

???

No need for bigger injectors unless u're going after big HP like 200RWKW+

Bigger Brakes? - R32 Type-M brakes are almost identical to R33 brakes.

RB25Box I can understand this cause the RB20DET box has problems with big HP.

RB25Engine? - mate its only 27kW or so diff between the two DET engines and the 32 is a slightly lighter car.

Originally posted by JimX

Wasn't it only me that said that?

Ok, if you start with a stock R32, to bring up to similar spec (hp handling-wise) as an R33 you will need:

Bigger injectors $200?

Bigger brakes $500?  

RB25 box and engine $3000?

Laber to fit all the above $1000?

That $8k is already half used up and you haven't even done anything to the power yet. Plus all the time off the road to put it all in. Like I said, if you want an R32 it's probably better to find one with some or all of the above mods already done, unless you plan on keeping it stock. Or just go the whole hog and get a GTR.

I would rather an R32 GTS-t with $8k of performance mods than a stock R33 GTS-t too. But that is assuming that the choices are as black and white as that. They aren't.

Edit: And this is assuming you can even get an R32 for $8k less. I just had a quick look in the trading post and the cheapest R32 GTS-t I could find is $14k. Average around $16k. At least they are holding their value pretty well.

I can't figure out why people choose their cars based on how common they are. Do you really care that much about what other people think?

Yer, people are silly choosing a car on that basis. If you look at it that way then ANY skyline is common, except maybe for an R34 GTR or something.

They are much of a muchness in terms of most things and everything seems to balance out a bit.. and don't forget being "more common" for a 33 is often a good thing, means parts and advice might be more readily available.

Personally I think this 'common' argument is a little specious.

GTS Skylines are cheap performance cars. For less than $20,000 you're not gonna get a whole lot of exclusivity.

Even twice that for a GT-R isn't gonna get you into some sort of "LOOK AT ME, I CAN DUST FERRARI's" fraternity.

I was looking for power, handling, braking, size (yes I like BIG cars), reasonably cheap mods and a big cabin (show me a bigger coupe interior).

The 33 is really close enough. I really want that 33 GT-R - it's not twice as good but I'll be willing to pay the price to find out.

T.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...