Jump to content
SAU Community

R32 Gtr Gunmetal Grey

peter_fc

By peter_fc,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

peter_fc Contributor

peter_fc

Posted
Posted

post-58479-1230356683_thumb.jpgpost-58479-1230356683_thumb.jpgFor sale is an R32 GTR 1990 model.

Specs are as follows:

Engine has been rebuilt about 1500km ago using excellent quality components.

Forged pistons 20 over

Argo rods

ACL race bearings

Nitrated crank

block was chemically cleaned and crack tested

new welsh plugs

bored and honed

cylinder head was cleaned up, surface ground, pressure tested, 24 valve seat adjustment.

cams are standard

all gaskets are new.

Have all reciepts to prove!!!!

Turbos are N1 spec garrett items

Twin 2.5in exhaust to the cat then 3in right through

Everything in the engine bay is polished, looks great.

final comp 9.1:1

Vehicle has been dyno'd at 235kw on 18psi with a final tune still to be had.

Injectors are nismo 660cc items

Fuel pump is in tank walbro 255lpm 500hp

ECU is Apexi

Interior is in very cood condition. No holes in seats etc.

Wheels are 17 in tyres are about 80% all round.

Suspension is all standard GTR.

Price is $16000

Rego till oct 2009

If you need more info call on 0414 444 522

post-58479-1230357068_thumb.jpg

post-58479-1230357214_thumb.jpg

post-58479-1230357330_thumb.jpg

post-58479-1230357484_thumb.jpg

post-58479-1230357609_thumb.jpg

post-58479-1230357726_thumb.jpg

post-58479-1230357992_thumb.jpg

post-58479-1230358100_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/250256-r32-gtr-gunmetal-grey/
Share on other sites
shy_s6 Veteran

shy_s6

Posted
Posted (edited)

so oil restrictors in the head? any oil return mods?

what brand pistons?

metal headgasket?

hows the body/paint?

any interior pics?

apexi comp asin power fc with handset?

wat boost controller?

Edited by shy_s6
peter_fc Contributor

peter_fc

Posted
  • Author
Posted

Pretty sure the oil system is still standard and standard return system, i'll have to check with dominator. I think the only alteration was a slightly higher return valve spring.

Supertech forged pistons and argo rods

Head gasket is race series composite all supplied by dominator

Body is in good condition, slight ding in passengers rear quarter at the lower half near the sill panel.

Paintwork is still good.

The apexi power fc has hand controller

Boost controller is just a duel stage turbosmart item

Will post up interior pics.

Cheers

  • 2 weeks later...
Tim GTR Proficient

Tim GTR

Posted
Posted

Hi,Have you done any mod to the oil pump shroud? GTR32 has this weak point.Coming up to Sydney Next Monday to Thursday, would like to inspect the car.I have got 3 GRT34( 99 V-spec, 02 V-spec II. 02 V-specII NUR, and 6 GTR33 ) would like to line up a GTR32 and working on importing A GTR35 )

Would you be interested in swapping? 2000 S2 Stagea, 99 RX7 S8 , 94 Supra or even some Hiace turbo 2WD and 4WD

Alex and Tim Melb. 0439818008

Tomek Experienced

Tomek

Posted
Posted
Hi,Have you done any mod to the oil pump shroud? GTR32 has this weak point.Coming up to Sydney Next Monday to Thursday, would like to inspect the car.I have got 3 GRT34( 99 V-spec, 02 V-spec II. 02 V-specII NUR, and 6 GTR33 ) would like to line up a GTR32 and working on importing A GTR35 )

Would you be interested in swapping? 2000 S2 Stagea, 99 RX7 S8 , 94 Supra or even some Hiace turbo 2WD and 4WD

Alex and Tim Melb. 0439818008

:) :) :(:banana:

H8TR Explorer

H8TR

Posted
Posted
Hi,Have you done any mod to the oil pump shroud? GTR32 has this weak point.Coming up to Sydney Next Monday to Thursday, would like to inspect the car.I have got 3 GRT34( 99 V-spec, 02 V-spec II. 02 V-specII NUR, and 6 GTR33 ) would like to line up a GTR32 and working on importing A GTR35 )

Would you be interested in swapping? 2000 S2 Stagea, 99 RX7 S8 , 94 Supra or even some Hiace turbo 2WD and 4WD

Alex and Tim Melb. 0439818008

wat a champ start a thread and post up these bad boys

xthommox Enthusiast

xthommox

Posted
Posted
Hi,Have you done any mod to the oil pump shroud? GTR32 has this weak point.Coming up to Sydney Next Monday to Thursday, would like to inspect the car.I have got 3 GRT34( 99 V-spec, 02 V-spec II. 02 V-specII NUR, and 6 GTR33 ) would like to line up a GTR32 and working on importing A GTR35 )

Would you be interested in swapping? 2000 S2 Stagea, 99 RX7 S8 , 94 Supra or even some Hiace turbo 2WD and 4WD

Alex and Tim Melb. 0439818008

Wow!!

You a car dealership?

peter_fc Contributor

peter_fc

Posted
  • Author
Posted

All the oil pump system is standard as far as i know. Pretty sure the only alteration was a slightly higher rate return valve spring.

Don't really want to swap, just need to sell the car, but thanks anyway.

You can contact me on 0414 444 522 to arrange a time.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • GTSBoy
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By GTSBoy · Posted

      My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...