Jump to content
SAU Community

Recommended Posts

A friend of mine is about to wreck an R31 Silhouette. PM me for his number if anyone needs anything before it goes to scrap. It's in Melbourne. Its got an LSD. I don't have any photos of the thing, but I'm pretty sure it looks a lot like a fairly sad R31 Silhouette.

Link to comment
https://www.sau.com.au/forums/topic/251055-r31-silhouetteparts-available/
Share on other sites

A friend of mine is about to wreck an R31 Silhouette. PM me for his number if anyone needs anything before it goes to scrap. It's in Melbourne. Its got an LSD. I don't have any photos of the thing, but I'm pretty sure it looks a lot like a fairly sad R31 Silhouette.

Drew, how compatible is the diff with the C210 R180 and any idea what ratio? I'm at the point where I want an LSD but there is no cheap way out. I want 3.9 and lower. If you know of anything going let me know. Cheers Rick

Unfortunately I think the R31 diff is a very different beast.

Do like I did and find a second-hand subaru WRX clutching-type LSD centre and pop it in your existing R180 diff. Bit of fiddling round, but a diff specialist should be able to do it.

Thanks Drew, I've sent him a msg, but i'll only buy it if it's 3.9. 3.5 is to high for my kind of use.Thanks for keeping me in mind. Put all new shocks and struts in today, rides nice but I've got to replace my rear swingarm bushes,they're roooooted. Cheers Ricky

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...