Jump to content
SAU Community

T3/t4

TIR60

By TIR60,
in Engines & Forced Induction

 Share

Recommended Posts

TIR60 Enthusiast

TIR60

Posted
Posted

just wanna know what the go is with t3/t4 turbos on rb25's

i got a r34 gtt rb25neo

was wondering if anone has put a t3/t4 on a rb25 and what mods they had and wat power they got form it

i have onyl heard one bad thing about the tubro and that is that they may have lag issues.

but if it hauls ass in high then id ont care. :D

so let me know

Link to comment
https://www.sau.com.au/forums/topic/251337-t3t4/
Share on other sites
NISMØ Community Regular

NISMØ

Posted
Posted (edited)

hey check this out, i reckon it suits u well

http://au.youtube.com/watch?v=ag4nLpu1nJ0&...feature=related

that was a joke ^^

HKS gt-rs are good for that power range , other then that mayb highflowd rb25 or rb30 factory turbo or a AVO or IHI turbo, there pretty good too.

Edited by NISMØ
Link to comment
https://www.sau.com.au/forums/topic/251337-t3t4/#findComment-4358643
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted
i jsut want a good turbo that will allow me to go to 250atw with mostly stock parts.

stock turbo only takes 12psi. and i want more!

Please try searching then.

There are pages and pages, threads upon threads about 250rwkw... how to get there, what you need and so on.

A good start is the FI Guide, and the Dyno Result threads, its what they were made for afterall

Thanks

Link to comment
https://www.sau.com.au/forums/topic/251337-t3t4/#findComment-4358672
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...