Jump to content
SAU Community

Recommended Posts

is that 3rd gear paul? awesome results mate...all that bullcrap to support your fuel system LOOOOOL

Nah mate second.

at 8000 RPM with 4.111 diffs (stock)

1st = 87

2nd = 138

3rd = 190

4th = stock (1:1)

5th is shorter at 290 but i stuck with the stock gear which goes to 310

Another problem is the CAS. Both Steve and I have developed Crank Angle Sensor noise above a certain RPM.... So basically you cant be 100% accurate with the timing up in the rev range. I was warned about this before this tune and was hoping it wouldnt come up.... but it did. Now in all my years of scratching around on SAU and the pommie forum I have never seen a thread discussing this issue. Has anyone else come across this and if so why isnt it common knowledge!?!?! There is a fix... a balancer trigger... but thats expensive and to be honest I really cant be arsed........ thats what I said 2 years ago! haha

Yavuz says it's from the belt flopping or shaking at such high rpm. We are only talking 7000rpm plus. So for most people it doesn't matter, bit the people in this thread clearly aren't "most" people :action-smiley-069:

Yes it's a common problem but usually easily fixed by fitting a dual pulse disc in the CAS.

Don't remember it being more than $100 and when your engine blows you'll kick yourself. Either that or you'll see your timing walk around 10-15 degrees in the top end and that'll be enough for you to make the decision to fix it

Another problem is the CAS. Both Steve and I have developed Crank Angle Sensor noise above a certain RPM.... So basically you cant be 100% accurate with the timing up in the rev range. I was warned about this before this tune and was hoping it wouldnt come up.... but it did. Now in all my years of scratching around on SAU and the pommie forum I have never seen a thread discussing this issue. Has anyone else come across this and if so why isnt it common knowledge!?!?! There is a fix... a balancer trigger... but thats expensive and to be honest I really cant be arsed........ thats what I said 2 years ago! haha

Paul it's discussed in this thread from GTROC

http://www.gtr.co.uk/forum/52458-rb30-engi...ts-pics-12.html

Starts on page 12.

Mark

Yes it's a common problem but usually easily fixed by fitting a dual pulse disc in the CAS.

Don't remember it being more than $100 and when your engine blows you'll kick yourself. Either that or you'll see your timing walk around 10-15 degrees in the top end and that'll be enough for you to make the decision to fix it

Would that be the same mod to the CAS that needs to be done to run an autronic known as a slipper disc?

What is it like driving a car that takes until 5k before the power really kicks hard? Is it annoying on the street or is there still plenty of meat below 5k? Looks like a solid 200kw at 4k, does it feel good at the lower revs?

Edited by Rolls

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...