Jump to content
SAU Community

Recommended Posts

heya....

when i drive my car, with the windows down, at speeds around 30 - 40km/h, there is a screech screech screech kinda sound. frequency increases with speed.

i kinda figured maybe one of the brake discs were warped and were periodically just rubbing themselves on the brake bad henceforth the screeching cause under braking, the sound doesnt come.

could it be nething else?

only happened recently when i got the front shockies changed.

Link to comment
https://www.sau.com.au/forums/topic/25194-screech-screech-screech/
Share on other sites

have you had the disk machined yet? not sure what sound is like, but were the shocks them same as what was replaced? if not the wheel might be warped and rubbing on the shock... what kind of clearance is there???

Some pads (probably factory pads, not sure but mine had them either way) have a metal bracket on the inside, which touches on the metal disc when the pad gets low. This will make a metallic screeching noise which is really annoying. Either the noise itself is meant to be the warning or it was originally designed to hook up to a circuit like on some cars (but not apparently on Skylines) that show a light in the dash to tell you when the pads are low.

Screeching could be many things, this is just one possibility. Usually it's glazing or something.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...