Jump to content
SAU Community

Recommended Posts

Quick stupid question,

What is the go with the red and blue GT badges, I have heard the red are for turbo models is this true? I have a R33 with an RB25DET but have the blue badge (it's the origional engine so I'm guessing the previous owner must have swapped the badges if that's the case red been for turbo models).

Link to comment
https://www.sau.com.au/forums/topic/252479-gt-badges-whats-the-difference/
Share on other sites

Pretty darn certain that red is turbo, blue is non turbo

you can swap them though, it's not difficult. Tinks had a 40th anniversery GTST with blue ones on but the previous owner had changed them.

Pretty darn certain that red is turbo, blue is non turbo

you can swap them though, it's not difficult. Tinks had a 40th anniversery GTST with blue ones on but the previous owner had changed them.

That's what I was thinking, (previous owner must have changed them)

I don't think I could be bothered changing them though, I think the blue badge on a silver car looks better then the red badge on silver.

Thanks,

I've seen those yellow ones also, on ebay that is; never on a car though

Edited by Nimmo
Quick stupid question,

What is the go with the red and blue GT badges, I have heard the red are for turbo models is this true? I have a R33 with an RB25DET but have the blue badge (it's the origional engine so I'm guessing the previous owner must have swapped the badges if that's the case red been for turbo models).

Hardly a silly question man.....always thought on this as you did.

Looking forward to more 'edumicated' responses!!

Anyone seen a green one?......I think they're 'Hydrogen' or sumtin. (silly face icon goes here)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...