Jump to content
SAU Community

Mines R32 Gtst Front Strut, Random Oil Cooler

john-e boi
 Share

Recommended Posts

john-e boi Mentor

john-e boi

Posted
Posted (edited)

here i got a very rare mines r32 gtst front strut bar. i only got it up today. seller told me its for a r33 (r33 fits r34) but it arrived it has a sticker saying r32 gtst and does not fit my car. it is in very good nick and is a very rare item. $300 ono when

also got is an 18 row oil cooler. only comes with cooler itself. bought it hoping to install in my car, but since then changed my mind. one row looks to have been sitting up against a bumper bar leaving it with a silver mark. otherside looks untouched. is dirty in the photos but other than that in very good condition. $40 ono

item are in western suburbs melbourne and not willing to post due to no time. willing to meet up for those interested.

call or sms if no answer 0432 45 46 95

strut1.jpg

strut2.jpg

strut3.jpg

strut4.jpg

strut5.jpg

cooler5.jpg

cooler4.jpg

cooler3.jpg

cooler2.jpg

cooler1.jpg

Edited by john-e boi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...