Jump to content
SAU Community

Recommended Posts

look to see if there is a fuse for it, otherwise a diode or two will keep the factory alarm from seeing the door pins and ignition switch feed , stops the doors locking.

there might be a door lock relay under the dash, on the drivers side kick panel area, get down on your knees and look under the dash while holding the pin switch closed on the drivers door, turn the key to the on position. listen close do you hear the relay click? you might be able to unplug it ?

Edited by sapphiregraphics
Link to comment
https://www.sau.com.au/forums/topic/253983-r33-help/#findComment-4387999
Share on other sites

every one could be correct here lol.the question is tho.are the doors locking as soon as you start the car or only until you go over about 25 kmh? if its locking as soon as you start the car then its the alarm,if its locking when you go over about 25kmh then its the factory option locking and there is no way around that unless you feel like disabling your rear window demister in the process as they are tied in together.

Jack

Link to comment
https://www.sau.com.au/forums/topic/253983-r33-help/#findComment-4388013
Share on other sites

every one could be correct here lol.the question is tho.are the doors locking as soon as you start the car or only until you go over about 25 kmh? if its locking as soon as you start the car then its the alarm,if its locking when you go over about 25kmh then its the factory option locking and there is no way around that unless you feel like disabling your rear window demister in the process as they are tied in together.

Jack

good call jack forgot about that one,,in which case, find the Vehicle Speed Sensor wire on computer and trace it to the factory alarm module(look on a wiring diagram then test it with digital meter not a test light, but if your not a confident in car wiring get a expert !! hey jack you bored ? I dont have time or I would sort it out for ya.

the wire would either go to ground or positive to trigger the door lock relay upon reaching 25kmh or so?

Edited by sapphiregraphics
Link to comment
https://www.sau.com.au/forums/topic/253983-r33-help/#findComment-4388020
Share on other sites

Guest CleanAndSimple

i know for sure there is a autolock function when you go over 25km in a r33.

but there is also a feature built into viper alarms.

i have a 33 and a viper alarm. locks the second i start the car. and also if i let someone out (keeping the car on) and then drive off. locks at 25km. so i reakon it would be a bit of both doing it. search around i know theres a few diy's to disabling the 25km lock. as for the alarm as cronic said. go to the installer and ask him to disable the rest.

in my option i like it. not to often you try to open a door while moving. :)

hope this helps.

Link to comment
https://www.sau.com.au/forums/topic/253983-r33-help/#findComment-4388948
Share on other sites

good call jack forgot about that one,,in which case, find the Vehicle Speed Sensor wire on computer and trace it to the factory alarm module(look on a wiring diagram then test it with digital meter not a test light, but if your not a confident in car wiring get a expert !! hey jack you bored ? I dont have time or I would sort it out for ya.

the wire would either go to ground or positive to trigger the door lock relay upon reaching 25kmh or so?

yea its a possitive trig to lock it.

my answer was based on this jack?

from that it would defenantly be the alarm doing it.

and there is NO simple way to stop it from auto locking (the factory option) to get around it you could use a relay system or mount some switches somewhere to turn the locking off when you dont care about loosing the rear window demister and then when you want the demister just switch it on and live with the auto locking.

PM me what model alarm you have mate and ill find the process to stop the auto locking from the alarm.thats if you dont want everyone else knowing what alarm you have.

Edited by Jack88
Link to comment
https://www.sau.com.au/forums/topic/253983-r33-help/#findComment-4389144
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not quite understanding or I'm missing steps here, (I appreciate people are trying to inform my brain but I am of the dumb, especially today) - All I want to do is mount the male BSPT of the OEM sender into the system somewhere without it snapping the adapter via vibration. The Nissan sender has a male 1/8 BSPT output. The block has a (very destroyed) 1/8 NPT input. I'm not really sure how a lathe assists with that, and also don't know anybody with a lathe, nor specifically what I would want to buy. I'm not really sure how adding additional adapters creates a better, more leak proof resilient seal here.
    • 10 minutes on a lathe would be one way to achieve literally anything you want, too. (except for AN type stuff - just talking about M-F with BSP and NPT in any mix/combo).
    • yeah, so "something" should be -4 AN....to a hose....to a -4AN to NPT fitting *edit* sorry, I surely have that backwards. The LS is from land of the free so it must be NPT at the block, and the Nissan sender is BSPT. But still, conceptually the same
    • Yea I mean I know it exists, but finding (specifically) female BSPT to male NPT (i.e, to plug a Nissan OEM sensor into a 'standard' NPT port) was truly difficult. I don't think I'll recreate the setup I had in the past unless it's (possibly?) advisable with a stronger T piece made of steel, but who knows if the aluminium threads in the block become the next weak point etc. Given it may need to be redrilled out and something tapped into it, it'll need to be Female BSPT to the something that ends uo coming out of the side of the block.
    • Sounds like a perfect time to harness up a couple of the dogs, show the horses what real power is about!
×
×
  • Create New...