Jump to content
SAU Community

Recommended Posts

hi im new the site so please bare with me as i cant find any info on the topic yet. i got a 97 rs4 stagea and when i do a slow u turn the front of the car clunks and shudders in sync with one rotation of the tyre. im new to mechanics and dont know where to start. the clunk is worse in 4wd or when reversing. it shakes the whole car a bit and can be felt through the steering wheel. while driving straight or doing a standard corner its fine and is quiet as a mouse.

Link to comment
https://www.sau.com.au/forums/topic/254655-stagea-clunks-loud-in-the-front-end/
Share on other sites

Welcome Patrick,

Probably best to have someone look at it if you are not used to playing down below, could be a few things, CV, tie rods etc. Maybe go for one of those free 'safety checks', then get back to us with results.

Welcome Patrick,

Probably best to have someone look at it if you are not used to playing down below, could be a few things, CV, tie rods etc. Maybe go for one of those free 'safety checks', then get back to us with results.

I agree safety check is the way to go, but don't let them do the work unless your cashed up :(

Hi and welcome

If it is a heavy metal clunk and only there when on full lock I would put money on it being a CV joint. If you are not any good with spanners and things mechanical then it might be best left up to a mechanic to replace.

Phil

Mine used to do that too.

But only if I was in 50:50 mode. And only when I turned sharply slowly.

I dunno why but for some reason I thought it was normal.

Maybe someone told me it was. It was a few years ago so I cant really remember.

How often are you you using your 4wd lock button ? unless you have some serious slip situations, such as its snowing there or you live on the side of a grass mountain, not wise to use it. It will quickly destroy itself on hard surfaces.

sorry i havnt been able to reply in a while cos i was outta town. i might put it in for a safety check ike yous suggested. the tie rods/ends should be fine as i replaced them about six months ago. the problem was still there before and after. i also had the cvs cleaned up about the same time, apparently the boots were split but the cvs were fine so he cleaned them out and put some new boots on them. ive also checked tyre pressure and its fine. i also recently replaced the front stabilzer bar linkages which were worn. as for the 4wd use i rarely use it. maybe for 5 min or so every 2 months just so it gets some use. ill book it in for a safety check and let you guys know. thanks

are your tyres all good? Also, might be a good idea to have the Attessa fluid changed (you'll find the reservoir in the rhs hatch in the boot).

To change the attessa fluid can you just suck all the old stuff out of the boot compartment with an syringe. fill it to top turn car on and crack the bleed nipple under the car and then keep filling it?

i did the safety check and was told that the cvs were fine and so was the tie rods. he seems to think the rear difff locks and causes the clunk. as burkey said his used to do it so is this a standard thing or are we just special. i might change the attessa fluid to as most of the mechanics would probably miss it. i asked one and he couldnt tell me what the oil was for.

  • 2 months later...

i have tracked down the cause of the problem. the fluid in the transfer case was badly burnt and past its prime. the fluid in the rear near the hatch only activates the awd and it was fine. the oil i changed was in the centre diff off the side of the transmission. i used castrol transmax z and the shudder is all but gone. reading the manual a little bit of a braking effect is normal but the amount i had was pretty severe. thanks for your help guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...