Jump to content
SAU Community

Recommended Posts

not sure if anyone has seen these parts before... but i visited their shop today and was surprised they make these so cheap:

http://www.vivagarage.com.au/nissan/stagea..._aeroparts.html

Make sure you check the Nissan - Stagea links up the top, because there are more parts available. I had a good look at their R34 stagea today. Looks the goods!

Nigel. SA

Link to comment
https://www.sau.com.au/forums/topic/254842-stagea-body-kits-cheap/
Share on other sites

not sure if anyone has seen these parts before... but i visited their shop today and was surprised they make these so cheap:

http://www.vivagarage.com.au/nissan/stagea..._aeroparts.html

Make sure you check the Nissan - Stagea links up the top, because there are more parts available. I had a good look at their R34 stagea today. Looks the goods!

Nigel. SA

2048150955_97c605f1cc.jpg

nice find....the 34 front looks good...wonder how much labour is to fit it.

More to the point, how much do the rest of the parts cost.. they only list the front bar and fenders... not the bonnet, the hinges, the bonnet latch the headlights the headlight brackets and the radiator support

Got abit excited when it seen the R34 conversion kit and then remembered R34 non xenon headlights are around $1000 a pair then around $2000 for xenon head lights.. bonnets are only $100 for a second hand one so the conversion would be relatively cheap apart from the damn headlights :)

Edited by SHIZNT

Picked up my type M front bumper on Thursday. Currently getting it fitted to my Stagea as we speak, holes are not pre-drilled. Friendly service at Viva Garage and they love to talk about the stags. Once its fitted correctly, I pull it off again for a light rub and spray. :ermm: Just in time for the car show next weekend.

Will post pics when done ... and if it ain't too hot. :banana:

Here's a very rough chop..

Trying to decide do I save my money and slowy buy parts to do a R34 front end conversion and just continue taping the cracks in my bumper.. get another Nismo look alike from Monkey Warehouse or get a Vivgarage Type M bar..

IMG_0027-1.jpg

stagea2.jpg

Do the Viva, I like the look of those kits (Masa) I am planning on getting one for my s2 stag. Plus there looks to be quite a bit of meat on the bottom part of the front bumper so i imagine it would hold up reasonably well. Looking at your nismo front bumper it doesn't look like it would take much to damage that.

Got abit excited when it seen the R34 conversion kit and then remembered R34 non xenon headlights are around $1000 a pair then around $2000 for xenon head lights.. bonnets are only $100 for a second hand one so the conversion would be relatively cheap apart from the damn headlights :P

Where do you find s/hand genuine alloy r34 gtr bonnets for $100. :P

R34 GTT bonnets will not suit.

Pretty sure r34 zenons are about $1600 EACH new.

I would also question the fitment quality of copied Masa R34 guards from Viva. If they have not re-shaped them and just taken a mould from the original Masa guards they would fit even worst.

I have a genuine set of Masa guards and they do not fit perfectly and will be scrapping them soon for some re-worked CCubed copies.

hey Jay .... wasnt that the bumper the caryard had on previous ?

Kinda looks the same but the bar the caryard had on it was a Abflug bar.. there rare as hensteeth to find and are over $1000 for a new one from Abflug in Japan then you have nearly $800 for postage ontop of that..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...