Jump to content
SAU Community

Recommended Posts

guys I want a few of these units

sigma_innovation-img600x450-12206206721xt5ce47705.jpg

sigma_innovation-img600x450-1220620672tos6ad47705.jpg

sigma_innovation-img600x450-1220620672qmp0ju47705.jpg

I'm attempting to rework a few for the Oz market. basically I'm fixing the FM radio and fixing them up.

if you have one I'd like to know. I do not want the the panasonic units (RM-W50SAS)

Link to comment
https://www.sau.com.au/forums/topic/254855-wanted-clarion-oe-radios-ex-c34/
Share on other sites

make sure its the one above. there are two versions and they look IDENTICAL.

Oooh I'll check if I still have mine as it may have been thrown out. If not, all I have to do is figure out how much it will cost to send up to Queensland, and it's yours

ok

for those with PN2098E - that one is almost done. new FM front end and a few component changes sorts that side of things out.

band change is easy - getting the FM tuner to co-operate in the fun bit.

thanks go to 66yostagea!

Edited by Chris Rogers

Chris, are you going to want these for a while? or just want a couple so you can figure out what needs to be done to fix them up? i have one just like the one in your first post but i'm still using it, and will be for a couple more months until i get something else.

yep I'm goign to take a few of them. 2098s I dont mind. prefer if the CD section worked. one I redid today needs a laser I think and that is probably going to kill that unit.

would like to get a few of the later ones as the 2098 doesnt like my ipod box.

do you have one like in the top pic and if so do you know who made it? (PN2263E is what I'm chasing.)

acutally take a pic of it in situ. I have both versions here and I'll know the difference when I see it.

are there two different manufacturers for the same faced cd player?

anyway here is a pic of mine. just like the one in your first post.

but like i said, until i get something else to go in its place (a couple of months), im still using it. cd player fuction is good, even play burnt cds without an issue.

there is. pansonic make one that the chassis is identical apart from the rear of it. only difference I can see from the front is a silver volume knob.

yours looks to be a clarion.

if you have teh schematic for that unit - yes please. I have a local schematic for a PN 2371 on the way now.

as that sits ( I have been listening to it fo the past 3 hours now) its a IPOD patch that speaks nissan NBUS on the back of a reworked 2098E. for me it wil make a good test/bench radio.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...