Jump to content
SAU Community

Recommended Posts

Saw this R35 GTR at MSCA sprint at Sandown 18th Jan 09 - my car is the blue 1600 beside. Shows how cars have grown over the years - 40 years of Datusn/Nissan evolution from 900kg 4 door family car to 2 tonne monster.

The GTR was doing 1:23s with 180km/h limiter still in place. Despite hitting the limiter about 1/3 the way along the straights and lots of cars overtaking, it was still the fastest car on the day.

DougSandown181099.jpg

Link to comment
https://www.sau.com.au/forums/topic/256008-r35gtr-at-sandown/
Share on other sites

The GT40 in the front will almost certainly be a replica either a DRB, a Tornado or infact any one of atleast a dozen different knock offs that you can buy. The shame of it is I have yet to see one driven properly.

They are pretty to look at & apparently ok to drive. Not sure as despite a couple of my mates building them I can't fit into the damn things. Gurney bubble anyone? :P

The GT40 in the front will almost certainly be a replica either a DRB, a Tornado or infact any one of atleast a dozen different knock offs that you can buy. The shame of it is I have yet to see one driven properly.

Thats true, last time I was out at Sandown with MSCA, I was held up for a few corners by that GT before finally getting alongside it on the straight and passing it.

There will be another Black R35 GTR Premium edition doing some laps this Saturday at Sandown, together with a Porsche GT3 and 2 x Ferrari 360's as part of the Driver Dynamics Track Day with Kev....

I will be interest to know if it can get into the 1:23s with the 180 km limiter still on

what are you planning on doing with the fluids? Will you stick with Mobil 1 or go to something like Redline? And are you planning on changing any of drive-train fluids to that Willall stuff? they claim a lot less particular matter floating around than the OEM stuff...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Great work! Thanks for documenting the process.
    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • Take the fall as a warning sign for future endeavours  Stay safe mate
×
×
  • Create New...