Jump to content
SAU Community

Tommy Kaira Zzii

KISIN

By KISIN,
in General Automotive Discussion

 Share

Recommended Posts

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted

Awesome car!

I, myself took a while to find any info on it. The company is more so a tuning garage for Japanese performance cars and have done afew Euro cars and produce their own cars.

+ their website does not say much about it either and not much info at all on the AWD system tho...

All I know atm is the Tommy Kaira ZZ II was a $90,000 sportcar door coupe production car with a reverse mid mounted RB26DETT with 550hp (410.14 kW), 6 speed manual gearbox, does 0-400 metres in 3.3 secs and weights about 1500 lbs (680 kg) with 6pot front brake calipers and 4pot rear brake calipers.

It also featured front and rear aero diffusers, and a fully built roll cage.

IMO it is one powerfull and lightweighted fast car.

http://www.fast-autos.net/vehicles/Tommy_Kaira/2001/ZZII/

http://en.wikipedia.org/wiki/Tommy_Kaira

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
:D

Yeah I was suprised too, but its what I could only find on Fast Autos forum...

it was a fun car to drive on GT3 :laugh: well maybe not that particular model

Yes I was a fun car to drive in GT3.

I AM AGREEING WITH YOU! ;)

:D

LMAO! THANK YOU! :)

Thanks SKYLINE i already found out that much, i just want to know how to run the 26 gearbox in reverse and still have 5 forward and 1 revers gears :) keen on building something similar to a ZZII...

As they say "Crazy Japs" LOL! The things they do amazes me too and keeps me wondering.

All I can think of is they have modified the gear setup in the gearbox and the drivetrain...

Anyway all the best on your conversion.

Medium Dave Proficient

Medium Dave

Posted
Posted

To build one KISIN you would require a totally custom gearbox, the front diff in the sump could be utilised to drive the rear wheels, drive to that diff could be sent in the same way as a normal gtr (just backwards) and forwards to a front diff (which would usually be to the rear) but it would all have to spin backwards, lock the transfer case and be totally modified to have the H pattern shift the correct way around fro the driver. Then you would need to build the car, which you could build as a full spaceframe with intergrated roll cage, then glass fiber body, custom lights, fittings, glass etc...

If you were going to all this trouble you would probably want to register it as an ICV so you can drive it on the road, which, depending on your particular state you would need a suitably new engine, I think 3-4 years old or there abouts with the factory computer and emissions equipment...

You will spend well in excess of 6 figures, mabey even just for the gearbox, and it will take thousands of hours of custom fabrication. Good luck with the project KISIN, keep us all updated with a build log :thumbsup:

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
it's 0-60ks in 3.3sec..
Im sure they meant 0-100km/h in 3.3....

400mtr is a qtr mile...

Yeah my bad LOL! 0-100km/h in 3.3 secs. I don't know about the quater mile... Damnit can't edit my post...

In USA it would be 0-60mph in 3.3 secs.

To build one KISIN you would require a totally custom gearbox, the front diff in the sump could be utilised to drive the rear wheels, drive to that diff could be sent in the same way as a normal gtr (just backwards) and forwards to a front diff (which would usually be to the rear) but it would all have to spin backwards, lock the transfer case and be totally modified to have the H pattern shift the correct way around fro the driver. Then you would need to build the car, which you could build as a full spaceframe with intergrated roll cage, then glass fiber body, custom lights, fittings, glass etc...

If you were going to all this trouble you would probably want to register it as an ICV so you can drive it on the road, which, depending on your particular state you would need a suitably new engine, I think 3-4 years old or there abouts with the factory computer and emissions equipment...

You will spend well in excess of 6 figures, mabey even just for the gearbox, and it will take thousands of hours of custom fabrication. Good luck with the project KISIN, keep us all updated with a build log :thumbsup:

Interesting... Sounds like you done it before?

Yes updates will be good.

KISIN Veteran

KISIN

Posted
  • Author
Posted
To build one KISIN you would require a totally custom gearbox, the front diff in the sump could be utilised to drive the rear wheels, drive to that diff could be sent in the same way as a normal gtr (just backwards) and forwards to a front diff (which would usually be to the rear) but it would all have to spin backwards, lock the transfer case and be totally modified to have the H pattern shift the correct way around fro the driver. Then you would need to build the car, which you could build as a full spaceframe with intergrated roll cage, then glass fiber body, custom lights, fittings, glass etc...

If you were going to all this trouble you would probably want to register it as an ICV so you can drive it on the road, which, depending on your particular state you would need a suitably new engine, I think 3-4 years old or there abouts with the factory computer and emissions equipment...

You will spend well in excess of 6 figures, mabey even just for the gearbox, and it will take thousands of hours of custom fabrication. Good luck with the project KISIN, keep us all updated with a build log :thumbsup:

Thanks for the reply. Ive already found someone that can build me a chassis and another for the body. Very good points you bring up, ICV - thats the path i hope to take, but 6 figures, maybe just for the gearbox ???

Apparently a company in the US can build this for me "no problems at all", however unless i see one of their models working, im not ordering anything with the aussie $$ this weak...to their credit though, ive seen their other work and its pretty damn good, even modified a lambo for SEMA...According to them, its piss easy to get it to work.

Medium Dave Proficient

Medium Dave

Posted
Posted

Just had a thought - the porche 4wd gearbox could be worth looking at, I think porche engines spin the right way, then the drive to the front wheels will be fine, H pattern is ok, the only trouble would be building an adapter plate to mate to the RB, and sending drive rearwards - you would need to remove the rear drive diff in the gearbox and send drive rearwards with a driveshaft - being very careful of final drive ratios, but they should be able to handle the power straight out of the box. Also you could even use one of the flappy paddle gearboxes for extra techy'ness.

*dont underestimate the cost of a gearbox for such a project - it will probably be the most expensive single part!

If you are keen to register it, talk to your local transport authority about building an ICV and they will point you in the direction of approved engineers to help you :D

KISIN Veteran

KISIN

Posted
  • Author
Posted
Just had a thought - the porche 4wd gearbox could be worth looking at, I think porche engines spin the right way, then the drive to the front wheels will be fine, H pattern is ok, the only trouble would be building an adapter plate to mate to the RB, and sending drive rearwards - you would need to remove the rear drive diff in the gearbox and send drive rearwards with a driveshaft - being very careful of final drive ratios, but they should be able to handle the power straight out of the box. Also you could even use one of the flappy paddle gearboxes for extra techy'ness.

*dont underestimate the cost of a gearbox for such a project - it will probably be the most expensive single part!

If you are keen to register it, talk to your local transport authority about building an ICV and they will point you in the direction of approved engineers to help you :D

Already had a chat to the transport department regarding ICVs and the gearbox is what im worried about the most !

KISIN Veteran

KISIN

Posted
  • Author
Posted
hahaha.. post up pics of the build when youve got everything!

would be interesting to see it.

Well i have a fairly unique body *hopefully* getting made and right now i know there will be many haters because of what it will "copy" so to say...but im building MY dream car for ME :domokun: Hoping to have this baby done in a couple of years (yes couple, and thats pretty quick if you ask some others who have built cars from scratch). Pretty close on striking a deal with the US company, just the body is holding me back...you'll see why 1 day lol :) Until then buying an investment property to help fund this sucker !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...