Jump to content
SAU Community

Recommended Posts

Engine:

N1 24U block (own modifications done) race prepped

Fully balanced and blue printed

Chemically cleaned/crack tested and washed

Torque plate bored honed & decked

All new welsh plugs

Tapped oil gallaries

Fully balanced/detailed crank and grub screwed

New Ross harmonic ballancer

Race prepped crank gurdle

Shot peened/prepped standard rods with ARP bolts

Full ARP bottem end stud kit

Ross Racing forged pistons (ceramic coated)

ACL race bearings mains & rods

N1 oil pump (modified)

N1 water pump

Genuine Nissan gasket kit

Fully port & polished head

Match ported intake

Brass valve guids

Standard valves

Upgrade valve springs

Standard cams

Greddy adjustable cam gears

Gates timing belt

New genuine exhaust studs & nuts

Garrett GT3082r .82 turbo polished front cover

Braided oil lines

Speedflow fittings

Tial 44mm wastage

Ebay spec manifold modified

Greddy twin entry air intake pipe

2 x RB25 Air flow meters

4" dump pipe

4" catback exhaust

4” high flow ballistic cat

600x300x115mm Greddy style intercooler

Custom PBR clutch

Nismo lightened flywheel

Nistune ECU

Sard fuel pressure regulator

custom fuel rail

r33 gtr lift pump

044 fuel pump

2L surg tank

3/8" Aluminium fuel lines

Heap of speed flow fittings & push lock hose

Sard 700cc injectors

Alloy dual core radiator

Silicone radiator hoses

Silicone heater hoses

Exterior:

Full colour change

18x9 18x10 roh drift r's

carbon exhaust shroud

carbon top secret bonnet painted

genuine gtr front bar and gtr grill

rear drift lip

nismo b pillars

tein coil overs

Inerior:

gtr dash cluster

autometre boost guage

hybrid boost controller

greddy turbo timer

Link to comment
https://www.sau.com.au/forums/topic/256366-final-stages-d/#findComment-4420116
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...