Jump to content
SAU Community

Recommended Posts

Item 1

Genuine RB25DET Trust-Greddy Intake Plenum for Skyline R33 GTS-t.

This is not a cheap Chinese knock-off, don't be fooled, cheap inefficient knock-off's will cost you over $500 plus the issues of fitting and aligning. Also known for not delivering expected performance. Comes with PCB valve and other necessary custom attachments.

Asking $500 (replacement cost over $1500).

Item 2

Nismo/Sard 850cc side feed/high impedance injectors with collars for R33 RB25DET, less than 2000km use in 3 years. In perfect ‘near new’ condition, clean and can be fitted as is!

Injectors are fitted to a polished stainless steel Nissan fuel rail and have an upgraded Apexi adjustable rising rate fuel regulator. Comes with its own electrical harness.

Asking $800 (replacement cost is over $1800).

Item 3

HKS 264 Cam Shafts (Intake and Exhaust), 264 degree and 9.0mm lift.

Asking $800 (replacement cost $1200).

Item 4

HKS Adjustable Cam Gear (Exhaust only).

Asking $100.00 (replacement cost $350).

Item 5

HPI Engine Dampener for R33 GTS-t.

This item is perfect to reduce torque loss due to engine movement. Solid Engine mounts are noisy and cause far too much vibration through the cabin.

Asking $200 (replacement cost $350).

Item 6

Aluminium Radiator Deflector / Cooling Panel for R33 GTS-t.

Asking $100 (replacement cost $250).

Item 7

CUSCO Brake Booster for R33 GTS-t.

Increase your stopping power by removing unnecessary brake movement.

Asking $100 (replacement cost $200).

Item 8

Heavy duty, high performance oil cooler and oil filter relocation kit for R33 GTS-t RB25DET.

Significantly reduce oil temperature whilst relocating your oil filter to somewhere easy to access. This item is perfectly suited for those using the aftermarket Plenums.

Asking $500 (replacement cost $1200)

Item 9

Splitfire Coil Packs for RB25DET.

These coil packs have done less then 2000km, they are practically new.

Asking $500 (replacement cost $700)

Location – Brisbane (South-side)

Item Condition

The following items have been on my car for approx 2 years and have done less than 2000km in total. All items are in perfect 'as new' condition. Car was a show car and never raced or flogged.

Reason for Selling

Parts are surplus as the ‘show car’ they were on has been de-modified.

Price & Payment Condition – AS LISTED AGAINST EACH ITEM

Extra Info

All serious offers will be considered, if I do not reply to you it is because I do not consider your offer serious or reasonable. Only make an offer if you are intending to buy the turbo set up. Also, I will not reply to you unless you include your full name, telephone number and your address. Please don’t waste your time or mine.

If you can get a better price then this buying it from your dog’s third cousin’s friend on your great uncles side…then do it and please do not waste my time!

Contact Details

(1) You can reply to this post;

(2) You can send me a Personal Message; or

(3) You can call me on 0414 575 676.

Pictures – As attached

Item 1

Genuine RB25DET Trust-Greddy Intake Plenum for Skyline R33 GTS-t.

This is not a cheap Chinese knock-off, don't be fooled, cheap inefficient knock-off's will cost you over $500 plus the issues of fitting and aligning. Also known for not delivering expected performance. Comes with PCB valve and other necessary custom attachments.

Asking $500 (replacement cost over $1500). ON HOLD PENDING PAYMENT

Item 2

Nismo/Sard 850cc side feed/high impedance injectors with collars for R33 RB25DET, less than 2000km use in 3 years. In perfect ‘near new’ condition, clean and can be fitted as is!

Injectors are fitted to a polished stainless steel Nissan fuel rail and have an upgraded Apexi adjustable rising rate fuel regulator. Comes with its own electrical harness.

Asking $800 (replacement cost is over $1800). ON HOLD PENDING PAYMENT

Item 3

HKS 264 Cam Shafts (Intake and Exhaust), 264 degree and 9.0mm lift.

Asking $800 (replacement cost $1200).

Item 4

HKS Adjustable Cam Gear (Exhaust only).

Asking $100.00 (replacement cost $350). ON HOLD PENDING PAYMENT

Item 5

HPI Engine Dampener for R33 GTS-t.

This item is perfect to reduce torque loss due to engine movement. Solid Engine mounts are noisy and cause far too much vibration through the cabin.

Asking $200 (replacement cost $350). ON HOLD PENDING PAYMENT

Item 6

Aluminium Radiator Deflector / Cooling Panel for R33 GTS-t.

Asking $100 (replacement cost $250).

Item 7

CUSCO Brake Booster for R33 GTS-t.

Increase your stopping power by removing unnecessary brake movement.

Asking $100 (replacement cost $200).

Item 8

Heavy duty, high performance oil cooler and oil filter relocation kit for R33 GTS-t RB25DET.

Significantly reduce oil temperature whilst relocating your oil filter to somewhere easy to access. This item is perfectly suited for those using the aftermarket Plenums.

Asking $500 (replacement cost $1200)

Item 9

Splitfire Coil Packs for RB25DET.

These coil packs have done less then 2000km, they are practically new.

Asking $500 (replacement cost $700)

Location – Brisbane (South-side)

Item Condition –

The following items have been on my car for approx 2 years and have done less than 2000km in total. All items are in perfect 'as new' condition. Car was a show car and never raced or flogged.

Reason for Selling –

Parts are surplus as the ‘show car’ they were on has been de-modified.

Price & Payment Condition – AS LISTED AGAINST EACH ITEM

Extra Info –

All serious offers will be considered, if I do not reply to you it is because I do not consider your offer serious or reasonable. Only make an offer if you are intending to buy the turbo set up. Also, I will not reply to you unless you include your full name, telephone number and your address. Please don’t waste your time or mine.

If you can get a better price then this buying it from your dog’s third cousin’s friend on your great uncles side…then do it and please do not waste my time!

Contact Details –

(1) You can reply to this post;

(2) You can send me a Personal Message; or

(3) You can call me on 0414 575 676.

Pictures – As attached

Thank you to everyone for the interest in the parts. Sorry but many of the parts have been sold. I wish I had more but I only have what is listed left.

Again thanks to everyone.

*****************

Item 1

Genuine RB25DET Trust-Greddy Intake Plenum for Skyline R33 GTS-t. SOLD

Item 2

Nismo/Sard 850cc side feed/high impedance injectors SOLD

Item 3

HKS 264 Cam Shafts (Intake and Exhaust), 264 degree and 9.0mm lift.

Asking $800 (replacement cost $1200).

Item 4

HKS Adjustable Cam Gear (Exhaust only). SOLD

Item 5

HPI Engine Dampener for R33 GTS-t. SOLD

Item 6

Aluminium Radiator Deflector / Cooling Panel for R33 GTS-t.

Asking $100 (replacement cost $250).

Item 7

CUSCO Brake Booster for R33 GTS-t.

Increase your stopping power by removing unnecessary brake movement.

Asking $100 (replacement cost $200).

Item 8

Heavy duty, high performance oil cooler and oil filter relocation kit for R33 GTS-t RB25DET.

Significantly reduce oil temperature whilst relocating your oil filter to somewhere easy to access. This item is perfectly suited for those using the aftermarket Plenums.

Asking $500 (replacement cost $1200)

Item 9

Splitfire Coil Packs for RB25DET.

These coil packs have done less then 2000km, they are practically new.

Asking $500 (replacement cost $700)

DAMN T I WISH I COULD GET THOSE CAMS OFF U BOY IM DROOLING OVER THEM AS WE SPEAK LOLZ damn auto is on the way out now so i gotta get that fkn fixed if ya still got em when i get some money together ill probably get them off ya mate...... u got my number and i got urs ill give ya a buzz when i got the cash for em..... that is if u dont sell em

UPDATE OF PARTS LEFT - EVERYTHING MUST GO ASAP

Item 1

Genuine RB25DET Trust-Greddy Intake Plenum for Skyline R33 GTS-t. SOLD

Item 2

Nismo/Sard 850cc side feed/high impedance injectors with collars for R33 RB25DET. SOLD

Item 3

HKS 264 Cam Shafts (Intake and Exhaust), 264 degree and 9.0mm lift. [b]SOLD[/b]

Item 4

HKS Adjustable Cam Gear (Exhaust only). [b]SOLD[/b]

Item 5

HPI Engine Dampener for R33 GTS-t. [b]SOLD[/b]

Item 6

Aluminium Radiator Deflector / Cooling Panel for R33 GTS-t. ON HOLD

Asking $100 (replacement cost $250).

Item 7

CUSCO Brake Booster for R33 GTS-t.

Increase your stopping power by removing unnecessary brake movement.

Asking $100 (replacement cost $200).

Item 8

Heavy duty, high performance oil cooler and oil filter relocation kit for R33 GTS-t RB25DET.

Significantly reduce oil temperature whilst relocating your oil filter to somewhere easy to access. This item is perfectly suited for those using the aftermarket Plenums.

Asking $500 (replacement cost $1200)

Item 9

Splitfire Coil Packs for RB25DET. SOLD

Location – Brisbane (South-side)

Pictures – As attached

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...