Jump to content
SAU Community

Recommended Posts

not sure what bearing....

But they said the head would need a recon or freshen up etc just by the sound of it, if that makes sense...

and also said even if the crank can be saved it would be over $500 to have it tidied up etc

The head might need to be decked and cleaned out but thats all unknown until it gets pulled out..Not major they just shave the bottom of it where it sits on the block for the head gasket..

Is this your first rebuild?

If you're mate is a mechanic I would get him to pull the engine out and open it up and see how bad it is..Go into the build threads here on SAU in the motorsport section and forced induction.

You have to look at it before you do anything...how loud was the knock?? how long has it been knocking?

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Cheers mate.

Yer he will have a look in beofre i do anything... Im just working on worst case scenario...

It was knocking BAD BAD not for to long tho as when i worked out what it was i traliered it everywhere.

Yer id rather not rebuild as i need to sell. and trying to come away as cheap as possiable...

Easy as pie. Fill in the forms with new engine number, they then check that the engine didn't come from a stolen car and that's it. Mind you the last time I did it was around 6 years ago and they reprinted my rego papers to reflect new engine #

simple logic really.

you have a engine in your car that most likely has spun a bearing.

can you drive the car? No! so pull the engine out.

why trailer the car everywhere and get people to listern to it? thats a waste of time and money.

surely you can hear the noise yourself and know that it neads to come out and be stripped down.

and you have a mechanic mate thats prepared to help you,

so why is the engine still in the car?

its a 3 hr job to remove the engine, put it on a engine stand and pull the sump off.

you will then know what has happened and the cost of what needs fixing.

if everything is rooted then strip the good parts and get a stocker and bolt it back in.

if damage is minimal then take the crank to chris miltons get them to machine it new bearings and go again.

either way the engine has to come out. so thats allways the first thing to do.

simple logic really.

you have a engine in your car that most likely has spun a bearing.

can you drive the car? No! so pull the engine out.

why trailer the car everywhere and get people to listern to it? thats a waste of time and money.

surely you can hear the noise yourself and know that it neads to come out and be stripped down.

and you have a mechanic mate thats prepared to help you,

so why is the engine still in the car?

its a 3 hr job to remove the engine, put it on a engine stand and pull the sump off.

you will then know what has happened and the cost of what needs fixing.

if everything is rooted then strip the good parts and get a stocker and bolt it back in.

if damage is minimal then take the crank to chris miltons get them to machine it new bearings and go again.

either way the engine has to come out. so thats allways the first thing to do.

Exactly what I said..But it is scary for the people that are used to this sort of work :)

Also why does everyone think a GTR rebuild is $10K?? That with expensive parts and for high power...

Nope. It's a common misconception. People hear 10k, then tell the next person, etc.

5k will get you a full rebuild with standard parts. 10k is something that will handle 300-400kw+

6-7k is a forged build with oil mods which will handle very decent power.

Unless you're thinking... Jun stroker kit or something... which is like $15k+ all up

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...