Jump to content
SAU Community

Recommended Posts

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

hey crimmo i was just wondering how much did it cost u to get a RB20DET and where abouts did u get it from. also hows the swap going.

Hey boyd, i bought my RB20DET from Japanese Motorsport, it cost $1650, they were on special and i think they still may be. I also bought a VG30 turbo, 1 piece dump pipe + front pipe and a big f*** off front mount :D

The swap is going a bit slow, wiring looks imposible, and i think i will be taking it to fours'n'more to be wired up.

As for the cooler piping, i think ill run it over the rad pipe, not sure yet though, i will post some picture later today of the conversion so far :)

Coming along wickedly Crimmins mate!! Keep it up!!! Only issue is, ur motor was auto ay?? Is the stock ECU gonna be happy with the now manual conversion??? Just food for thought....Cooler looks like a nice fit to!

Josh i want them cupholders bro they rock :D

Crimmo nice work!Coming together well and should be a sweet ride.

DR JOSH thats one dirty engine!I gather it came of the boat like that as a front cut i just bought was a little grotty also.What did it spin up on the dyno.(Mine also needed people sitting on the boot due to the ark age rear suspension)

http://www.pbase.com/crimmo1/inbox

Here are some pics of the conversion so far

Stu_R30: Any tips for the wiring? How much need to be done before it will start/run? any pics?

i'll try to post up some pics of what my wiring looks like as i didnt do it and it looks like its all over the place, but it works!! also crimmo, those watanabe RS8 rims, what size are they as i'm looking at a set tommorro (ref to post 340 on page 14 for pic) any tips as thier wider than the hayashi's that were on the car to start with!

P.S. my car will be fin and engineered half way through next month in standard power output then once on road, rb25 turbo and unichip running the ECU she should be good for around 180-200rwkws!!

crimmo - to get them four spots on did you change to the r31 gts struts or did you adapt them with the standard mr30 stuff? im looking to do the 4spot converison soon and i have the 31 gts struts. anyone know of and hassles with this? and also crimmo, where did ya get that tower brace thingo (the blue thing) and how much?

also crimmo - was your car auto l24 once and did you get dragged by a trashed r30 with an rb20 down paynhem rd? (a while ago now)

Well you ain't getting the cup holders.

That was standard with a 3" turbo back exhaust. Made 117RWKW. It now has a cooler and some more boost and pulls alot harder yet to see what it makes, but I reckon somewhere round 140. Yep those pics are from it over in Japan still. And the engine bay still hasn't been cleaned to this day. They were the only photos I saw before I bought it and was very happy with it when it came over.

Josh/Crimmo when all our cars are back on the road well go have some cruisy fun and take some happy snaps..Maybe organise some kinda R/HR/DR30 cruise?? Those cup holders will be mine :cheers:

Mike Cash yeah Crimmo's car used to be L24 auto so yeah was prolly his...I beleive that they are S13 struts that he has used in the nose of his car as well, don't quote me exactly on that (my memory is CRAP) but imm pretty sure bout that...He'll explain it when he's on next i guess..

:inlove:

Crimmo nice work!Coming together well and should be a sweet ride.

DR JOSH thats one dirty engine!I gather it came of the boat like that as a front cut i just bought was a little grotty also.What did it spin up on the dyno.(Mine also needed people sitting on the boot due to the ark age rear suspension)

haha yes i do remember sitting on it with it trying to break lose on the dyno good fun :cheers:

josh very nice looking in not too bad condition for its age.

crimmo - to get them four spots on did you change to the r31 gts struts or did you adapt them with the standard mr30 stuff? im looking to do the 4spot converison soon and i have the 31 gts struts. anyone know of and hassles with this? and also crimmo, where did ya get that tower brace thingo (the blue thing) and how much?

also crimmo - was your car auto l24 once and did you get dragged by a trashed r30 with an rb20 down paynhem rd? (a while ago now)

i just picked up a tower brace today $140 for a CUSCO hr30 brace in the same blue, was waiting for whiteline to make them but found this one instead!

problems - got it all wired up, she cranks, sounds like its about to kick over...then just keeps crankin

its got spark and fuel...timing perharps?

just about ready to set it on fire ...

i have this problem with my r31 every once and a while, theres a temp sensor linked to the injectors that plays up, it will shut the injectors off, no fuel flow at all, with my wiring there is a wire running from, ok you know where the radiator connects to the head at the top there are two sensors, now the one closest to the head has a wire running to some wires connecting to a plug at the fire wall where the wiper motor is! there are something like 8-10 wires running into it, different colours, do you have anything like this with your wiring?

Josh/Crimmo when all our cars are back on the road well go have some cruisy fun and take some happy snaps..Maybe organise some kinda R/HR/DR30 cruise??  Those cup holders will be mine ;)

Mike Cash yeah Crimmo lives on Glynburn road bro and his car used to be L24 auto so yeah was prolly his...I beleive that they are S13 struts that he has used in the nose of his car as well, don't quote me exactly on that (my memory is CRAP) but imm pretty sure bout that...He'll explain it when he's on next i guess..

cool. im up for a r30 cruise, that'll be wild, wipe some smiles off some HSV owners faces!

As I said I'll be down for a cruise just gotta get my little bit of damage fixed and front end back on. As would Tom, corey and Aids???? maybe mick if he buys it no doubt. We could get some decent numbers out with all decent cars. Show what old school skylines can do. A couple of weeks till my new clutch will be in. How long are others expecting to be off the road for? Shane not much longer now? crimmo?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...