Jump to content
SAU Community

Recommended Posts

hey guys Im thinking of buying a r30 paul newmans edition for $500 (NZ $)

but there is something wrong with the injectors or comp, when the battery is connected they start pumping gas in even when the key is out of the ignition, what could it be? computer? dodgy wireing?

sounds like a realy problem. the r30's are getting old so the wiring starts to pack up. i woiuld look at the realys, i had a current problem with the whole fuel intection system shutting off. "saftey" ? took my fuse box of it mounts,. and it stoped. it could of also been my voltage regulator in my alternator spiking liking it was and killing it

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

hey guys Im thinking of buying a r30 paul newmans edition for $500 (NZ $)

but there is something wrong with the injectors or comp, when the battery is connected they start pumping gas in even when the key is out of the ignition, what could it be? computer? dodgy wireing?

is there a new fuel pump as its sound like they wired it up hell wrong, it would be a OZ $50 part to fix and the sparkies time $$ as well?

Listen guys, tell me how to posat thumbnails on this site and I will put up the short shifter pic for all to see.

And I saw someone advertising a Paul Newman, claiming as a "one off" in Australia, but you have, as you say 3 down in SA, there is mine in Sydney, there must be more in the country, doesn't someone in WA have one on this forum.

I was chatting to one of my friends in Adelaide just yesterday, and looking forward to getting mine finished, as I will take it down there for a cruise, might get in run in properly quickly.

Cheers

Can anyone get their hands on a drivers side head light for a DR30 Iron mask, had a slight bingle and smashed one. Need one desperatly as it goin in to get fixed soon.

Josh,

You tried Jaustech in Adelaide, the import a few of them.

If no good, give me a call, or contact Just Jap at Kirrawee NSW, they have a front cut advertised in the latest Zoom magazine #76. Ph: (02) 9545 0532. Be careful as they're pricy, I enquired recently for a grille and lower lip spoiler and they wanted $150.00 each.

Cheers, Dennis

Sams IS the Adelaide Paul Newman, its standard apart from a turbo that is apparently a "triple hybrid", filter and exhaust.  Its bloody clean though, and it sounds sweet, but its slow.  Sam reckoned that my car was noticably faster when he went in it... which is when it had a huge boost leak.  And now that mine doesnt have a leak, its much quicker

How many are there in Australia now?  When Ivan was advertising his he said there was only three... his, Pauls (now Sams) and another one that was in either Sydney or Melbourne

I still doubt that the Newmans had 200hp standard, or even much more than 145.

Shit, my Charade GTti must have been a monster... stock except for the exhaust it ran a 16.7 (granny launched... just drove it normally (ie sloooowly) off the line) but at 85mph lol

BTW Sam lives in the house behind mine :)

Adam/Sam,

Does he want a complete L20ET engine assembly?

Got mine for FREE, just pay the frieght to Adelaide from Sydney. I can probably arrange it for under $50.00 if you could pick it up from the depot.

I am taking the induction & exhaust system and any external parts I need to put on my MR30 L24E, probably take the tuebo rocker cover as well, but internals not going to be touched. Genuine 157K.

My PN is actually an 84 2 door, but import papers say 1982, it was imported in 1997, so it doesn't take a brain surgeon to work out what happened, no compliance plates to be found.

I have a small problem, the colour scheme is White/Silver, does anyone know the colours or their codes?

Anything on the compliance plates???

i think you'll find that the ones ghostrider and i are talking of are not STANDARD and you are on the mark with your stock power figures give or take! :)

you might be able to answer a question though! were the paul neumans released in 2 or 4 door version as my mates is a 4 door and he seem to think they were only ever released in the 4 door version??

I wasn't aware of a 4 door version of Paul Newman Version, only 2 doors, as it was released as a limited edition thing to celebrate the winning of the US Touring Car Championships, by Paul Newman.

I know of 4 door DR30's but not PN's.

I wasn't aware of a 4 door version of Paul Newman Version, only 2 doors, as it was released as a limited edition thing to celebrate the winning of the US Touring Car Championships, by Paul Newman.

I know of 4 door DR30's but not PN's.

??? thats what i through 2doors only for PN but his is full badged signed and has the interior!! hes not going to be happy about that! it runs the l20et so its not a dr either?? i also saw that 2door PN for sale which is what made me ask roy if there were 2door and 4door, i know of another PN that sold for $10000 on the other side of brizzy that is a 2door as well

Adam/Sam,

Does he want a complete L20ET engine assembly?

Got mine for FREE, just pay the frieght to Adelaide from Sydney. I can probably arrange it for under $50.00 if you could pick it up from the depot.

I am taking the induction & exhaust system and any external parts I need to put on my MR30 L24E, probably take the tuebo rocker cover as well, but internals not going to be touched. Genuine 157K.

My PN is actually an 84 2 door, but import papers say 1982, it was imported in 1997, so it doesn't take a brain surgeon to work out what happened, no compliance plates to be found.

I have a small problem, the colour scheme is White/Silver, does anyone know the colours or their codes?

Anything on the compliance plates???

with the paint i went to the nissan place here on the coast and they told me it should be on the manufactures plate on the fire wall, mines in japanese yours would be too! thats not to much help !! the black rocker cover with turbo on it does add that edge!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...