Jump to content
SAU Community

Recommended Posts

Hey guys, was wondering if someone could shed some light.

What are the options for MILD STEEL dump pipes only? I cant seem to find anything at all. For stock turbo might i add.

Currently have the stock dump pipe bolted to a 3" HKS front pipe. So im not after a front/dump combo.

Will i be better off having something custom made?

Im about to get it tuned, and according to the SAU gurus, theres alot to be gained over the stock restrictive dump pipe so wanted to get it done before the AFR tidy up with SAFC2.

Thanks alot.

Link to comment
https://www.sau.com.au/forums/topic/258061-r33-gts25t-dump-pipe-options/
Share on other sites

Why does it have to be mild steel?

Plenty of one, two piece and one piece split dumps in the trader section, all bolt up to the standard turbo, mine is a one piece split dump from jjr and im very happy with it.

grab a JJR and cut off the second half, or sell the HKS front pipe

So i might as well just get one made? Dont want to sell the HKS front pipe, as the good stuff doesnt sell here. Everyone in NZ wants the good shit for the cheap shit price.

Why does it have to be mild steel?

Plenty of one, two piece and one piece split dumps in the trader section, all bolt up to the standard turbo, mine is a one piece split dump from jjr and im very happy with it.

The reason i want mild steel is because i have already had a JJR stainless split front/dump combo. Had nothing but trouble with boost spiking even after modding so the wastegate flapper opens properly. And apon removal, the stainless stripped my 02 sensor thread and it took 4 hours to remove from the turbo with a gas torch. Not willing to try the stainless route again unless it is a high quality item and not cheap stainless.

What is regarded as good quality stainless? Im not sure what the numbers and grades mean.

if you already have the HKS front pipe then you might as well get the HKS dump that will bolt up straight to it with no mods required at all.

Id get one if i could scource a genuine HKS dump pipe. How can you tell if it is actually genuine? And who stocks them? Struggling!

could check out the GKTECH dumps? i got a split dump/front combo and they are two seperate pieces.

Thanks dude, just looked at their website and they dont look bad. Any problems with boost spike on the stock turbo? I dont want to go down that route again!

Thanks for the replies guys.

Edited by gotRICE?
The reason i want mild steel is because i have already had a JJR stainless split front/dump combo. Had nothing but trouble with boost spiking even after modding so the wastegate flapper opens properly. And apon removal, the stainless stripped my 02 sensor thread and it took 4 hours to remove from the turbo with a gas torch. Not willing to try the stainless route again unless it is a high quality item and not cheap stainless.

What is regarded as good quality stainless? Im not sure what the numbers and grades mean.

I have heard people mention those problems, i must have been lucky or maybe they work better with the vg30 rear housing i have.

AM Performance make a range of high quality, locally made, performance split (return or screamer) or bellmouth style dumps. all are made out of stainless (not 304 which is shit) and is guarenteed NOT to crack. straight bolt on fit.

Here is mine, its a screamer and as you can see, goes into the turbine itself as to seel it from the gate side of things... wont leak on idle.

pb240007.th.jpg

AM Performance can be contacted on [email protected]

Hey dude, have you looked up Tomei dump pipes? Theyre in a similar price range but the Tomei is the bellmouth design.

Heaps of stockists in welly.

I got mine from Soichi @ ST-HITECH up here in auckland. If you run out of luck, ring him up and he can sort you out! PM me if you want his number.

Try www.nengun.com

They should have them in stock.

Good Quality product as well

Extention pipes.. no wonder i never found then on Nengun!

But @ $511.. flag that. Its over half of what i paid for my full HKS High Power Silent from them! :blink: Economy FTL.

all are made out of stainless (not 304 which is shit) and is guarenteed NOT to crack. straight bolt on fit.

304 Is stainless... Its a number which refers to its metallurgical composition. 304 is your general purpose Austenitic stuff you see everywhere for food grade places followed by 316 which is a bit better. The best grade to use for Exhaust is 409, a Ferritic stainless with no nickel content, instead it is stabilised using titanium.

I think the problem with the chinese stuff is that although they may say its 304, its either full of impurities or its composition is only loosely based on the proper ratio of Carbon, Chromium and Nickel to make it. Personally I'd suggest using Mild steel for all the flanges or machined surfaces if you're going to use 304 to avoid warping.

Sorry to rant, I use stainless for everything where I work, so thought it should be cleared up.

yeah no probs mate, i know 304 is stainless, but my "its shit" comment refers to the fact that its not really any good in an exhaust application that sees rapid heat cycles. 304 is what most china dumps are made out of, hence the cracking issues.

AM performance dumps are made out of 316 manily and 409 is optional if you wish to spend a bit more.

have used 316 exhaust from the turbo back on my R32 drift car, for many meets, which saw lots of heat cycles, making 280 rwkw and never ever had a problem.

Bevan: http://www.fortyone.co.nz/parts/view/16848.html

Isn't Mac doing a 20% off thing? That would make that about $380? Not quite so crazy. Or get one of the Ds at Midas to make you one up, I was happy as with my stock turbo one and the one with my GT30R seems to be doing the trick too... both made by Dan.

Edited by Lithium
Bevan: http://www.fortyone.co.nz/parts/view/16848.html

Isn't Mac doing a 20% off thing? That would make that about $380? Not quite so crazy. Or get one of the Ds at Midas to make you one up, I was happy as with my stock turbo one and the one with my GT30R seems to be doing the trick too... both made by Dan.

wewt. I heart you Dan. Will get in touch with him.

Although 4-6weeks shipping? Maff

Edited by gotRICE?

Argh don't speak too soon - I pondered the terminology and I would get Mac to confirm that he is talking about the same thing though, I always took the "Front pipe" bit to be what connects to the rest of the exhaust though he describes it as connecting to the turbo.

He has a separate entry for "Extension kit" and no description of what it is, but is advertising it at $690 - or $552. Eek.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...