Jump to content
SAU Community

Recommended Posts

hi, all, I so just bought my second skyline last month, its 99 R34 GTT. the car came with a 3 inch FULL exhaust, a hks filter and teinz coilover suspension. Last week IS Motor Racing at Rockdale supplied and installed a G-readdy electronnic boost controller for me, did a tuning on the same day.(139.5 max power at wheel). The guy told me my car is pretty much in stock condition, and all the stock R34s are between 130kw - 150 kw, only brand new can do 206 kw, for a 10 yrs r34, any where between 130 - 150 kw is normal. then During the tuning, he tested 0.6 bar first, was ok. then he tried 0.8 bar twice, failed twice, the power or boost was like goes up then drop down. what he explained to me was the stock computer will cut the fuel off if over boosted and strongly suggested me to buy a power fc. At the end of day. the guy setted 0.6 as low boost, and 0.7 or 0.65 as high boost...

we all know 1 bar =14psi, so 0.6 = 8.4 and 0.8 = 11.2

my questions are

1. is 139.5kw sounds normal with above mods?? i searched Autospeed website, says there stock R34 can do around 140-150kw, then plus exhuast and filter can do 160-170, and 180-200 with power fc on top of all these. 139.5kw is just fxxk sad and much less, though i heard every dyno machine is different, differnt dyno machine can give you different KW.

2. anything wrong with the tuning?? stock computer should allow u to boost to a safe level without fuel cut, i searched formum, most of you can boost to 11 or 12 psi with same mods as i have.

dont know what happened to my car, really sad now, please help, thx for reading this, ai~~~~~~~ paid $18000 for a piece of shit

Link to comment
https://www.sau.com.au/forums/topic/258088-need-help-with-my-r34-gtt-plz/
Share on other sites

139.5rwkw is 186.93rwhp

not bad really.......

throw on a fmic and get a safc2 piggy back ecu if your on a budget

or get a full ecu, will see alot more power

and 1 bar of boost is 14.7 psi

example

my car went from 90rwhp to 245rwhp with just a tune

Edited by R32 Driver
hi, all, I so just bought my second skyline last month, its 99 R34 GTT. the car came with a 3 inch FULL exhaust, a hks filter and teinz coilover suspension. Last week IS Motor Racing at Rockdale supplied and installed a G-readdy electronnic boost controller for me, did a tuning on the same day.(139.5 max power at wheel). The guy told me my car is pretty much in stock condition, and all the stock R34s are between 130kw - 150 kw, only brand new can do 206 kw, for a 10 yrs r34, any where between 130 - 150 kw is normal. then During the tuning, he tested 0.6 bar first, was ok. then he tried 0.8 bar twice, failed twice, the power or boost was like goes up then drop down. what he explained to me was the stock computer will cut the fuel off if over boosted and strongly suggested me to buy a power fc. At the end of day. the guy setted 0.6 as low boost, and 0.7 or 0.65 as high boost...

we all know 1 bar =14psi, so 0.6 = 8.4 and 0.8 = 11.2

my questions are

1. is 139.5kw sounds normal with above mods?? i searched Autospeed website, says there stock R34 can do around 140-150kw, then plus exhuast and filter can do 160-170, and 180-200 with power fc on top of all these. 139.5kw is just fxxk sad and much less, though i heard every dyno machine is different, differnt dyno machine can give you different KW.

2. anything wrong with the tuning?? stock computer should allow u to boost to a safe level without fuel cut, i searched formum, most of you can boost to 11 or 12 psi with same mods as i have.

dont know what happened to my car, really sad now, please help, thx for reading this, ai~~~~~~~ paid $18000 for a piece of shit

So how the f**k did my completely stock r33 gtst s2 dyno 157kw atw. Took it to another dyno and it produced 155. i thought r34 produced more than 33's??

So how the f**k did my completely stock r33 gtst s2 dyno 157kw atw. Took it to another dyno and it produced 155. i thought r34 produced more than 33's??

numerous things

different settings

different dyno

different ramp rate

different air temp

and so on

~10rwkw is nothing to worry about

it is a reasonalbe assumption a bog stock r34 GTT would make more power than a bog stock R33

this assumes same dyno, same dyno, same operator, same settings, same environment

the ones you are comparing would not be the same, therefore whilst useful to compare in a ~ range, not a %100 comparison science

my questions are

1. is 139.5kw sounds normal with above mods?? i searched Autospeed website, says there stock R34 can do around 140-150kw, then plus exhuast and filter can do 160-170, and 180-200 with power fc on top of all these. 139.5kw is just fxxk sad and much less, though i heard every dyno machine is different, differnt dyno machine can give you different KW.

2. anything wrong with the tuning?? stock computer should allow u to boost to a safe level without fuel cut, i searched formum, most of you can boost to 11 or 12 psi with same mods as i have.

dont know what happened to my car, really sad now, please help, thx for reading this, ai~~~~~~~ paid $18000 for a piece of shit

The 206kw quoted by Nissan is not rwkw but flywheel kw. Your R34 is probably a little low and you are absolutely correct in that different dyno's produce different power figures. As an example I have Nismo FMIC, Nismo Injectors, Nismo fuel pump, Nismo reg, PFC, Z32 afm, hks 2535, Tomei cams, Apexi pod filter and full exhaust system from turbo back and produce 210 rwkw @ .6 bar on a Mainline dyno but 247 rwkw on a Dyno Dynamics dyno. It's all in how they set up the dyno. Like the other guys say, get a good FMIC and ecu and then you end up like the rest of us ..... just feeding the addiction!

cheers and enjoy the ride

Muz

Edited by Muz

Yeh i would say get yourself a Front mount its prolly running quite rich once you start winding the boost up the computer just dumps more fuel to keep things safe. Doing just that made over 25hp difference on my 33 and i was able to run a little bit more boost it ended up running 178kw at the rear wheels on 10psi.

I have a 34 now running 8.5psi with a FMIC full exhaust Apexi pod filter flowed turbo and the same Greddy boost controller at the moment its running 173kw at the rear wheels but should be able to get much more just tunning the boost controller once i work out how to set it right.

Out of interest what settings did he put on your boost controller to get the max boost your running?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...