Jump to content
SAU Community

Recommended Posts

I'm thinking about purchasing some springs for my R32 GTR

I was looking at the three big companies Whiteline, King or Tein.

Which do you recommend and why...

I currently have Ohlins on my car, I sure they are the ones from Japan. The springs look like they came off of a rail road box car (very stiff).

I would like something with a more reasonable spring rate.

Thanks in advance! :D

Link to comment
https://www.sau.com.au/forums/topic/258185-whiteline-king-or-tein-springs/
Share on other sites

Mine had ohlins with cut RSR springs when I bought mine.

Tried whiteline, bilstein.

Now have Tein super streets with whiteline adjustable swaybars.

Just right for crappy sydney roads and the rest....

I've had TANABE PROGRESSIVE SPRINGS put onto mine and I'm really impressed with ride quality. I've driven another GT-R with Teins and they were fine on the open road, but a bit too jittery/jiggly whilst going slow through suburban streets. U R welcome to try mine out.

Thanks for the offer Terry! I might take you up on it when I get back from my work trip.

I'm from Las Vegas and have only been here in Sydney since Nov 08. Look forward to meeting GTR owners.

I like my GTR but it needs some help!

Thanks!

Thanks for the offer Terry! I might take you up on it when I get back from my work trip.

I'm from Las Vegas and have only been here in Sydney since Nov 08. Look forward to meeting GTR owners.

I like my GTR but it needs some help!

Thanks!

That's cool Roy,

Just give me a PM when it's time

Terry

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...