Jump to content
SAU Community

Recommended Posts

i'm having the worse luck with my V since i've had it

only had it for less than 6 months and the radiator fans have karked it and now i'm having problems with my remote to unlock the doors. mine's a 2005 model and the remote has 3 bottons; lock, unlock and boot release.

i've got 2 of these remotes and the car isn't responding to either of them. just a few days ago it was still responding occassionally as i'd walk around the car pressing the unlock button like a mad man. but as of yesterday it's not responding full stop.

i can still lock/unlock the car when i push the button locks on the door lock but the remote itself won't lock/unlock anything.

can anyone offer any advice?

please don't tell me that i need to replace the door lock motor

Link to comment
https://www.sau.com.au/forums/topic/258736-problems-with-keyless-entry-remote/
Share on other sites

+2 on that opinion.. i was having the same problem on my 2 spare keys when i got the car... went to jaycar for the batteries and tada.. problem fixed.. anyway good luck, hope it fixes your problem.

When u start the car, does the "KEY" light on the dash flash green? If it does, its warning u, ur remote battery needs replacing. Happened to me few weeks ago. Replaced batteries, problem solved...no more KEY light flashing in green.

I too have a 2nd keyless remote and i haven't used it in more than 6 mths and the battery is dead on that one so its not unusual, ur 2nd one is flat too.

1 of my remotes is hardly ever used so for both remotes to have flat batteries will be very coincidental.

anyway i'll have a look at it tonight and i'm hoping that's all it is.

cheers

Hi Bzkr,

it's not coincidental...batteries of all types have a very normal and natural 'self discharge rate', and a very definite 'shelf'/nominal use "use-by-date".

I'm betting (and hoping!), that the guy's above are on the money!

Let us know how you get on!!

Cheers.

When u start the car, does the "KEY" light on the dash flash green? If it does, its warning u, ur remote battery needs replacing. Happened to me few weeks ago. Replaced batteries, problem solved...no more KEY light flashing in green.

I too have a 2nd keyless remote and i haven't used it in more than 6 mths and the battery is dead on that one so its not unusual, ur 2nd one is flat too.

you are a wealth of knowledge n15mo!

yes the green key light does appear so hopefully changing the batteries will sort it all out.

cheers all for your input.

no but the range thing should be more than enough to tell you that the batteries are dead. the dumb remotes do tell you (via a scan tool) battery strength.

I tell customers when the rangee drops on the remote it time to change the batteries and not at the last minute when they are on teh 2nd key and it dies at 3am in the morn... (dont ring me in a panic - I will say I told you so.)

our intelligent key looks like this:

keyfob.jpg

Does not need to be inserted into the key hole. Just have it in your pocket and turn a switch in the car to start. Same goes with locking and unlocking, we have a button on our drivers side door and no key hole same goes with the boot. If you have the key in your pocket, just press the button and it locks and unlocks door.....hence the name intelligent key :ermm:

finally got round to changing the batteries in the remote and it's all sweet now

cheers to everyone for assisting me with this

just a question on remotes, how many types of intelligent keys are there. looking at the post by n15m0, he's got 4 buttons on his remote. mine only has 3 (no alarm button)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Small update for the day... Turns out the intercooler and engine coolant hose kits are anything but complete....I probably should have counted better but it only really covers about half the coolant hoses in the car, it really just covers the visible stuff and pretends everything else doesn't exist (turbo water feed and returns and also heat exchanger lines through the 2 pumps and cooler) .In any case, I'm happier to have half reliable hoses than none, but a bit of a disappointment. Anyway...finger click (and 5 hours).....hoses in place, lots of spring clamps replaced with screw clamps, and engine coolant is on the pressure tester for the night.   Incidentally, upsized header tank is an Inifiniti factory option....not sure I'll ever do prod car racing in this but at least it is legal.
    • Just weld it onto the hot pipe. If you want it right after the turbo, put it right after the turbo. Or rip the comp cover off and drill and tap a hole into it.
    • hahaha glad I can rely on you two to go on a spiral at the drop of a problem! Some quick answers....the ducting is excellent top bottom and sides....everything that gets in goes through the coolers (noting the oil cooler redirects it out again, fair call if it is cooling 120o+) and the heat exchanger for the intercooler also has some scoops to pick up more than it's fair share too. I can't see going down the water spray track....no bueno for formal racing and a big risk for long rally days if you run out (plus I'm not clear if it is allowed there either yet).   Frankly, it must be possible to reliably put 400kw through a standard front end, the BMWs do it so I just need to work it out....I'm starting with reducing blockages in the way and adding some coolant capacity with a bigger header tank, flushing rad and making sure it was filled/bled properly (I didn't do the last coolant change); also taken measurements incase next step is a bigger/higher capacity custom radiator
    • wow, a completely stock GTR! I've got to admit, I have no idea from what you are describing....do you have  any idea where the "thump" comes from, and are you certain it is the HICAS light not something else like the cat overheat light?
    • nice work, welcome to the world of CAD! fabricating accurately in 3 dimensional space is beyond me....I almost always end up making something more than once...sorry I mean I extensively use prototyping
×
×
  • Create New...