Jump to content
SAU Community

Recommended Posts

  • Replies 489
  • Created
  • Last Reply

Top Posters In This Topic

20psi yeah? did you guys have a chat about boost level on stock internals?

yeah my limit is still 20 for reliability sake but on a bigger turbo like this it is still ultra efficient so the head room is higher than say a high flow at the same boost. (the point of diminishing return).

I would be happy on E85 to push probably another 20-30rwkw out of hamish's car for dyno queen status but we really wanted a direct comparo @ the same boost.

Oh and prepare your self for an sms daniel :D i hear you want to play dyno's on friday.

Edited by URAS
hahahah, me????? of course not... :D

Stao will be happy, he's always telling me to run 30psi :)

:)

haha 30psi rolls off stao's tongue too easy :) if only it was soo easy.

Edited by URAS

aahh... interesting

seems like run of the mill oils car manu's don't have issues with.. but it seems the high end oils aren't necessarily suited.... interesting

i should probably do an UOA on the Amsoil when i change it next

what boost control are you running?

i would have expected boost to hold up better with E85 due to the increased combustion gas due to extra fuel?

did you find that the engine runs a lot cooler? EGTs will be cooler

its good to see some comparision maps on a dyno that can't wheel slip..

the tests we have done at work with a GTRS on a stock SR20de+t with E85 found that even with LINK G4 ecu and boost control (i think its called vipec over there) we couldn't stop boost creaping up from 14-16psi from approx 5700rpm although we think the internal gate was the limiting factor with that turbo.

now hes running a GT2876R and a 38mm wastegate with no issues.

I'm hoping that early next year i can get my car tuned at my workshop on E85 once my fuel system is up to scratch. 324kw on 98 pump gas on 19psi on a stock rb25 on a dynapack dyno would be interesting to see what gains there is on my setup.

best part is i can have a simple switch that can switch my fuel, inginition, boost tables to suit the E85

worst part is theres no E85 on the pump in NZ. and its approx $2.5 per ltr here. 98s expencive enough at $1.82atm

sinthetic oils are what iv been told to run. 5w30 for street cars and 0w30 for race cars if its too thick the oil pressure is to high even when the car is up to operation tempature.. we have been using elf oil in the ones we have done..

im running a blitz dsbc spec s (the single solenoid one) and i'm guessing that's where the boost is going

not concerned at al tho... having 2psi less @ 7000rpm is pribably a good thing :D

would be nice to be able to flick a switch.... i think the only way i could do thoat with the pfc is to physically have 2 :(

  • 2 weeks later...

good news guys!

as halle informed me, e85 is now available at the pump for 109c @ fueltown southland!

i have contacted the store and spoken to the manager, and the fuel is supplied by powerplus. the fuel is also a 91/ethanol blend like united's

http://www.powerplusfuel.com.au/

after speaking to geoff, he informed me that getting the fuel from csr was impossible as the big fuel companies have signed contracts for the next 6 months preventing anyone else purchasing e85, however they are not using it themselves... and the contracts are probably going to get renewed.

the fuel, is selling at a rate of only 300l per week, so c'mon guys, lets go help 'em out!

i'll be filling up and testing later this week, and will post results when done.

good news guys!

as halle informed me, e85 is now available at the pump for 109c @ fueltown southland!

i have contacted the store and spoken to the manager, and the fuel is supplied by powerplus. the fuel is also a 91/ethanol blend like united's

http://www.powerplusfuel.com.au/

after speaking to geoff, he informed me that getting the fuel from csr was impossible as the big fuel companies have signed contracts for the next 6 months preventing anyone else purchasing e85, however they are not using it themselves... and the contracts are probably going to get renewed.

the fuel, is selling at a rate of only 300l per week, so c'mon guys, lets go help 'em out!

i'll be filling up and testing later this week, and will post results when done.

hmm not too far, might swap cats over to E85. Was going to mix up my own 98 and methanol but i may try the pump gear first. We made just shy of 430 on 98 so it should be a good laugh on e85 or a jungle juice.

Oi hamish when you get a min drop past and we will look at the fuel economy.

are you ready for the E85 on-slaught Trent?! :D all the east-siders will be wanting tunes now.

Guess who lives 5mins from Fueltown Southland :P:blink::)

I feel this must be represented in picture form, to illustrate the awesomeness of what has just occurred...

Point A = new E85 source

Point B = essentially where i live

Point C = old E85 source

route-1.jpg

It's karma i reckon :D

My E85 trips have been cut by a whopping 90%! It's almost exactly 1/10th of the distance to get E85 now!

:banana::banana::banana::banana::banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
    • As above, replace as many as you can afford. If anything, due to old age.
    • Can confirm previous shop that built my motor had no fking clue about oil control and caused my motor to shit itself after two track days. Current shop, Birrong Automotive, has managed to build me a motor, not to mention, has also let me tune it myself and it has yet to blow up after 7 track days. Great oiling success, yashimash.
×
×
  • Create New...