Jump to content
SAU Community

Recommended Posts

I bought this car to use build up as a drift car but have not really got the time and hae decided to move on.

details:

White 1992 R32 GTST Mspec.

has a new front bar and a pair of mspec sideskirts and a rear wing. the body is in good condition and there is no dents. the paint is ok and will come up pretty well in most places but it has a few chips ect. the car is missing a few minor parts. off the top of my head they are: climate control box, rear pillar trims, dash vents, rear screen trim, possibly wipers and some other bits and peices. the bonnet is gunmetal and has a few dints. it could easily be repaired and painted. it is missing the blowoff valve and a few really minor engine hoses. it has 4 piston callipers and stock wheels with tyres in good condition. the car is Auto and I have a manual tailshaft and some other bits to do a manual conversion. I was going to go to pick a part and get an R31 bot for $150 and put that in for some cheap manual action.

it HAS been complied and was registered in victoria untill the rego lapsed. it has no defects and is not written off and has not been reported as stolen. it will need a bit of work to get it roadworthy but is mechanically very good. the suspension, brakes, steering and engine are all in good condition.

as I said I was going to buld it up as a drift car but dont really have the time or room to do it now. if you did a bit of work and spent a few bucks you would have a car worth 8 to 10g.

I have replaced the coilpacks, engine loom replaced a headlight and some other bits and pices. since I have had it

The car also comes with a full TRUST exhaust, full alarm/immobiliser with central locking, and a pair of JIC coilovers.

the car is located in Melbourne but i am happy to freight it to you if you are keen. and it might work out well if you are after a cheap skyline. It drives and runs fine but has major boost leaks as its missing some hoses so you COULD pick it up and drive away but prob better to tow it.

I will organise photos soon but I am guessing at the price its not going to be here long so give me a buzz quick if you are interested.

Cheers!

Nic 0435145987

Link to comment
https://www.sau.com.au/forums/topic/259259-r32-skyline-gtst-white-mspec-3500/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...