Jump to content
SAU Community

Recommended Posts

none of the reasons you have presented make it a good reason to convert your car

you should just sell yours and buy a GTST and be done with it

it will take more time, cost more and end up with a 3/4 done job by converting it

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yeah well rain might be an issue but if your driving or not parked on a downward slope you should be right. maybe putting the seal back there with the washers in place might stil give some breathing space. it doesnt look bad at all. a mates done his R32 and it just makes it look more angry haha

none of the reasons you have presented make it a good reason to convert your car

you should just sell yours and buy a GTST and be done with it

it will take more time, cost more and end up with a 3/4 done job by converting it

well if you havent read it all then you obviously jumped to conclusions..im on my Ps under the laws and all the cops know my car in gladstone and as far as they know its the same a vl motor a non turbo they all know that so....

  • 1 month later...

well this thread is going to live again my mate whos a boiley me and him were talkling tonight were going to set it up stealth ive bought a new ute to drive and my cars pretty much going to be getting a complete rebuild over the next year hes taking the turbo off his xr6 and going bigger so he palmed it off to me :| its big yes but ill get everything done right so when it goes pop then ill put in some forgies

didnt get the exhausut done once i hit a pole i really dont know what to do with the car jsut contemplating respraying it gates timing belt kit new water pump alternator putting in the hid's new tyres new wheel bearing and selling it, im barly home as my works always taking me to cairns mackay blackwater and stuff so i could see the car in better hands plus if i was going to rebuild a car id want a 32 gtr instead its got everything big brakes 4wd already turbo, sjut buy something with moderate mods put a dog box in and itd jsut be a weekender i jsut bought a new ranger for a daily cops pull me up wayy too much in the skyline P plate skyline go figure

yeah well more thinking and looking at the work i have over the next year im open to offers atm its good needs a respray and some panel work needs the new wheel bearing ive got put in but other wise a very good car i think its got roughly 138 500 on it, parents are buying 40 acres so only logical thing to do is build a shed with a house type setup in it and buy something a little later on instead of it sitting around collecting dust, yeah jsut a caqnnon on it came with the car cars pretty much stock always looked after oil changed every 4000k

well if you havent read it all then you obviously jumped to conclusions..im on my Ps under the laws and all the cops know my car in gladstone and as far as they know its the same a vl motor a non turbo they all know that so....

Just curious, but are you aware of the costs/punishment of being caught driving a turbo car?

Is it really worth it?

Just curious, but are you aware of the costs/punishment of being caught driving a turbo car?

Is it really worth it?

Not to mention the issues surrounding insurance for you and other parties involved...should the worst happen...

How many years have u got left on ur P's?

This conversion will prob take ages and by the time its perfect, you will prob be off ur P's. You're better off waiting and trading in ur NA for a GTSt. Less headaches that way. Are you also going to replace the gearbox coz from what i understand the NA gearboxes are not as strong as the GTSt's.

Not sure what the law in Qld is, but you might be able to drive a GTSt insured if its in ur parent's name and is the only car in the household. I know in Vic there is some provision for this sort of thing, but if I were you, I'd be looking into any sort of loophole in QLD law that will allow you to drive it.

How many years have u got left on ur P's?

This conversion will prob take ages and by the time its perfect, you will prob be off ur P's. You're better off waiting and trading in ur NA for a GTSt. Less headaches that way. Are you also going to replace the gearbox coz from what i understand the NA gearboxes are not as strong as the GTSt's.

Not sure what the law in Qld is, but you might be able to drive a GTSt insured if its in ur parent's name and is the only car in the household. I know in Vic there is some provision for this sort of thing, but if I were you, I'd be looking into any sort of loophole in QLD law that will allow you to drive it.

afaik GTS's and GTSts share the same boxes, just with different ratios for obvious reasons. the conversion could be done in a weekend provided you have everything necesary. mines been a slow progression over about 2 months, even now still ironing out minor faults, but its come a long way :)

VIC does have provisions and such.

Excellent point.

To the

Browser had a hissy fit. As I was saying.

To the original poster, can you afford to lose your car AND pay for the other person's car if you have an accident? Don't say it won't happen, because it does.

Justcar and that quite frequently inspect imports that have been in accidents, and if they spot you're driving an illegal vehicle they won't pay you a cent.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...