Mounting The Power Fc Unit?

[ashr32]

hey guys,

for all you PFC kids out there, how do you mount the actual Power FC unit in a r32 gtst?

The stock ecu has mounts connected to it the PFC has none

i havent looked but can you swap the covers from the stock ECU or something?

I ended up doing the cable tie thing for a temp solution but there got to be a way someone has done it better.

cheers

ash

[joeyjoejoejuniorshabadoo]

just stuff it in there...

nutttin to be irried about, we all do it

[ashr32]

just stuff it in there...

nutttin to be irried about, we all do it

sweet nah thats my way of thinking to mate hahaha.

not like i got a warranty thats valid in australia anyway.

cheers

[_Ryan_]

there is a bracket on rhdjapan i saw when browsing...

[TiTAN]

i just bolted the bottom bracket from the stock ecu in place and cable tied the ECU to it.

[grigor]

When sold new, the PFc comes with 4 small pieces of adhesive backed Velcro to hold it against the bodywork.

High tech.

[H@ME]

i transfered over one of the bottom brackets (mines r33) and it sits on here fine no worries!!

[Damo_R34]

i just bolted the bottom bracket from the stock ecu in place and cable tied the ECU to it.

+1. haven't heard a single rattle.

[Bliksem]

+2 for lower bracket... Then I used some of the supplied velcro too.

[grandmasterb]

Made my own brackets and it bolted in.

[lineskee 33]

+3 for using the bottom bracket. I thought the adhesive velcro you get in the box was to mount the pfc hand controller. hehe well thats where mine ended up.

[Az_StrYdeR]

Cable tie's ftw

[ashr32]

Cable tie's ftw

well guys thanks for the advise, im going to get in contact with a mate how does metal fabing/folding.

if i could get him to make up a proper bracket would anyone be interested in a group buy?

[joeyjoejoejuniorshabadoo]

seriously, i have to force my kick panel closed every time i get it out.... no brackets required!

[W0rp3D]

seriously, i have to force my kick panel closed every time i get it out.... no brackets required!

+1

Fits nice and tight in between the 2 clips that hold the kick panel on and with the size of the loom is ver tight for room up and down, never heard it rattle.