Jump to content
SAU Community

Recommended Posts

I'll let you know friday at the lastest if i can land a new one for you.

New control unit costs just under $1400 though! Pretty pricey little sucker.

If your changing from the normal one with climate control, you'll also need a new front finisher.

Jesus - at $1400 I'll keep scouring yahoo for a second hand one. digital climate controls are around 7000yen second hand. Thats just over a $100. Don't waste your time buddy if it's anywhere near that :-)

Cheers

Bobby

Bobby - im chasing one for myself for my nismo r32.

Im waiting to hear back for stocks in Japan.

The part number for it mate is: 28525-05U12

Retail from nissan - $1369.55

or i can get it trade for about $1200 roughly including freight to your door.

Edited by 32NSMO

There is also another part - 27510-06U00 - Control Assy. but it didnt compute with Nissan

it was for 9002- *9108 listed as nismo n1

But the 28525-05U12 is for the same nismo, n1 specs, plus some other Jap spec's that i cant read. year models : 9012- *9108

I'd put some pictures up but im not sure how to. can i maybe email them to you ?

i'll print them off, scan them, and send em that way if you like. They're straight off Nissan's FAST system

Yeah sounds silly, but my GTR is an N1 and the climate control is non standard. I'm slowly searching for parts to get it all back to original, and this is one of the few things i need to chase up :-)

But $1400 = not in the near future :-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...