Jump to content
SAU Community

Recommended Posts

I'll let you know friday at the lastest if i can land a new one for you.

New control unit costs just under $1400 though! Pretty pricey little sucker.

If your changing from the normal one with climate control, you'll also need a new front finisher.

Jesus - at $1400 I'll keep scouring yahoo for a second hand one. digital climate controls are around 7000yen second hand. Thats just over a $100. Don't waste your time buddy if it's anywhere near that :-)

Cheers

Bobby

Bobby - im chasing one for myself for my nismo r32.

Im waiting to hear back for stocks in Japan.

The part number for it mate is: 28525-05U12

Retail from nissan - $1369.55

or i can get it trade for about $1200 roughly including freight to your door.

Edited by 32NSMO

There is also another part - 27510-06U00 - Control Assy. but it didnt compute with Nissan

it was for 9002- *9108 listed as nismo n1

But the 28525-05U12 is for the same nismo, n1 specs, plus some other Jap spec's that i cant read. year models : 9012- *9108

I'd put some pictures up but im not sure how to. can i maybe email them to you ?

i'll print them off, scan them, and send em that way if you like. They're straight off Nissan's FAST system

Yeah sounds silly, but my GTR is an N1 and the climate control is non standard. I'm slowly searching for parts to get it all back to original, and this is one of the few things i need to chase up :-)

But $1400 = not in the near future :-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...