Jump to content
SAU Community

Recommended Posts

dude ide stop here, your making a fool of yourself but hey. were all tossers :)

i dont think bullshitting is a good way to run a business.

so you dont even know whats in it?

hey buddy , i run a work shop , been there for GTRs for over 9 years , i build engines for a living , having one of the most powerfull GTR engines ever ! and i own two of them , worked on customers cars all the time , im saying i know what i sell and do for a living as where others take advantage over people who done know what they are selling in this case GTR PWR , thought to buy my car for $17000 , such a tosser ! very GAY

  • Replies 197
  • Created
  • Last Reply

Top Posters In This Topic

was the car advertised that it was from medieval times?no claim no return?has the process of thundergrinding been completed on flywheel?one would think it has.With a thornrose belted up its dinner dumper?

Edited by ylwgtr2
bring it on , ive herd it all now , go to accc for what , coz i didnt sell you car coz you didnt have enough money ! seriously , i avoided you due to there are better offers for my car not yours , remember what you said that your waiting for a pay out on your current car accident . im not going to hang around for tossers like you to try to knock the car so you can get it cheeper, other people have put better offers than your so i didnt worry about the little guy who couldnt afford this car , nothing else , i didnt take a deposit from you ! im not commited to a sale ! so what the f**k are you on about , and about abusive and missleading messages , well i have a I phone that records every detailed message from me to you , lets see what a current affairs thinks about this after they see the messages , get off your high horse and go by your R33 gtr v-spec for what you have to spend lets see what you can buy for $17000 , and for the people who backing this guy up get a life ! live your own !

lol Jim, quit while you're well and truly behind bud......you insist on digging this massive hole yet you're the one that's going to fall into it by refusing to accept at least some liability and move on (with or without an apology) rather that continuing a slagging match that you clearly cannot win.

You have no idea who or what kind of people are reading this and whether any of them are in the legal profession and therefore elect to take this matter further......last time I checked the Telecommunications Act, phone tapping was a federal offence! :)

I think if Jim was technicaly able to do a "phone tapp" it would be reflected in his spelling and grammer :D

but yeah secretly recording phone calls isnt illegal in victoria (might be in other states) nor is saving sms's.

You have no idea who or what kind of people are reading this and whether any of them are in the legal profession and therefore elect to take this matter further......last time I checked the Telecommunications Act, phone tapping was a federal offence! :)
I think if Jim was technicaly able to do a "phone tapp" it would be reflected in his spelling and grammer :)

but yeah secretly recording phone calls isnt illegal in victoria (might be in other states) nor is saving sms's.

yeah there are constant amendments to the Act (every year in fact) and can not only vary between states but also as to whether we're talking wireless, stored communications, B-Party interception or equipment based interception, so either way, I don't think our friend really knows too much about legalities anyway judging by his effort in dealing with potential clientele and in the methods that he uses to advertise.

I'm fairly certain my large brained friends that recording your own conversations and saving received messages does not constitute a "phone tap" in it's legal sense.

Poor grammar and spelling is also not an indication of intellect...The world is full of educated idiots, What's the point of a five star education if you don't have the intellect to back it up? give me a man with drive and intelligence but little formal education over an educated idiot any day.

The world is full of the useless pricks.

Makes as much sense as writing a man off on appearance alone (women..that's different) :)

I'm in no way defending or referring to either of these guys, just addressing the posts above.

Berjiggity!!

Edited by madbung
you are kidding right? . . .

Oh. So grammar and spelling is a measure of intelligence now? :P

In terms of this thread, looks like Jim has been caught out.

However, in terms of the deal with Harry, who knows who is lying.

And there is no legal case against Jim, not in terms of the actual deal, or advertisement anyway (i.e if he argues mistake.)

So no point trying to scare him in this regard, that said, his business reputation has obviously now been tarnished.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
×
×
  • Create New...