Jump to content
SAU Community

Recommended Posts

Hey all

Got and installed my new intake on the V35.

I also put a new K&N panel filter in. Its the same model number as a VS 3.8 litre commadore. A360.

It looks pretty good to me, i might use a longer piece of silicon pipe for the end nearest the box, but just to neaten it up a bit.

The sound is way better in the higher ranges and when the throttle is nice and wide open.

Down low, its great, no more noise than stock until you give it a hit.

Photos attached and a video with a digital camera.

The sound quality isnt great, but you'll get the idea i hope.

IMGP4553.jpg

IMGP4556.jpg

IMGP4558.jpg

(I dont know how to add the video to the thread)

Edited by V35 Matt
Link to comment
https://www.sau.com.au/forums/topic/259921-new-intake-on-the-v35/
Share on other sites

  • Replies 94
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

got the pipe off ebay. No idea what brand it is, but i like the stainless look rather than the plastic look of the z pipe.

Self install with a mechanic mate. But having seen it installed, anyone could do it without any worries at all.

Took 15 mins, as we removed some of the excess plastic from the box and the intake.

Now the muffler to install and it'll be complete as far as external mods go.

Hope to get better video over the weekend of the engine and the sound of the car going past.

wanna ask for some suggestion.. i heard somewhere that the oem 350z intake pipe is actually better, compared to stainless steel pipe, due to reason that stainless-steel pipe gets hotter easier and faster than plastic, so actually hot air are being suxked in..

Anyone can help to explain if this is right or wrong in anyway?

I do kinda agree if someone told me plastic gets hot the same way just like stainless steel... but it does also get colder faster than plastic rite?

this is the reason i still cant decide wat kind of intake i should buy and install on my v35.. ;)

The Truth from 350z is that the Intake is already a great design on 350z, They just need to use a Drop panel filter and it's already Perfect. But if you want the Noise you can go for the POD (ie JWT pop Charger). also most of the tuner in japan uses the SS tube like Matt did. So about the heatsoak i'm not too sure, if you want can just heatwrap it or so.

myself uses the CF Tube on mine with the K&N Drop in Filter.

P1000129.jpg

to be honest if you want to get the Z tube. at least get the one from US version. It doesn't have that Water Collector/Resonator on the tube like the Australia version does.

Cheers

Is that what it is!?? I asked the question on the g35 forum a while ago and no one could tell me exactly what it was or how come theirs didn't have it. Oh well...still does the job I guess.

Is that what it is!?? I asked the question on the g35 forum a while ago and no one could tell me exactly what it was or how come theirs didn't have it. Oh well...still does the job I guess.

Yeah, that stupid appendix thing is a resonator. The US models didn't get it. I am pretty sure the Japanese cars did. It's for NVH.

Honestly, if you bought a 350Z you shouldn't be allergic to a bit of induction noise.

Yeah the stainless steel pipe does get a bit warm but I think it would be hard to notice a difference in power compared to say a CF one, would probably only show up on a dyno over a number of runs. I should probably feel how warm mine gets now since I put the Kinetix Plenum on, would help a bit I imagine as that isn't metal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...