Jump to content
SAU Community

No Chit Chat - Just Results


Recommended Posts

i see i see.

have u looked at other options like a barrel water-air or similar? just some ideas as it seems ur going pretty out there and prolly chasing every little bit and i guess a std cooler setup is going to be alot heavier and have alot more length of piping

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Guest snotass
i see i see.

have u looked at other options like a barrel water-air or similar? just some ideas as it seems ur going pretty out there and prolly chasing every little bit and i guess a std cooler setup is going to be alot heavier and have alot more length of piping

Have looked at dry ice tube cooler and a a couple of other options, not positive sure what i will end up with at this stage - either way there will be a meduim between the comp and plenum.

The NOS will be mixed with 109 and not meth as we think it's to cool and will have adverse effects

The NOS will be mixed with 109 and not meth as we think it's to cool and will have adverse effects

not even worth running the gas on the transbrake to get it off the line with the meth? i guess its a choice of running the gas with meth and possibly risking an engine or playing it safe with the 109, i guess its a no brainer hey :)

so what ecu/ignition/timing setup is on it? (sorry for the gazillion questions lol)

Ignition is...

"M&W pro Drag 6 - which consists of 3 banks of two upgraded Mercury coils and two ignitor packs and use magnecore resistor leads"

Cause I already asked :-) Wasnt sure if he was going to keep posting here about it.

Guest snotass
not even worth running the gas on the transbrake to get it off the line with the meth? i guess its a choice of running the gas with meth and possibly risking an engine or playing it safe with the 109, i guess its a no brainer hey :)

so what ecu/ignition/timing setup is on it? (sorry for the gazillion questions lol)

EMS 8860

  • 1 month later...

Last i heard it was supposed to be ready for the last hi tech titles (drag meeting) here in Perth, but the torque convertor didnt arrive in time and now the drag season is finished so its wait till late in the year now unless theres a test and tune in the mean time. This is just info i read on another forum so dont qoute me on this :)

The input of energy required by a change of state from liquid to vapor at constant temperature is called the latent heat of vaporization. When a liquid undergoes a change to vapor state at normal boiling point the temperature of the liquid will not rise beyond the temperature of the boiling point.

The specific latent heat of vaporization is the amount of heat required to convert unit mass of a liquid into the vapor without a change in temperature.

Product Latent Heat of Evaporation

(kJ/kg) (Btu/lb)

Acetic acid 402 173

Acetone 518 223

Alcohol 896 385

Alcohol, ethyl (ethanol) 846 364

Alcohol, methyl (methanol) 1100 473

Alcohol, propyl 779 335

Ammonia 1369 589

Aniline 450 193

Benzene 390 168

Bromine 193 83

Carbon dioxide 574 247

Carbon disulfide 351 151

Carbon tetrachloride 194 83

Chloroform 247 106

Decane 263 113

Dodecane 256 110

Ether 377 162

Ethylene glycol 800 344

Freon refrigerant R-11 180 77

Freon refrigerant R-11 165 71

Freon refrigerant R-11 232 100

Glycerine 974 419

Helium 21 9

Heptane 318 137

Hexane 365 157

Hydrogen 461 198

Iodine 164 71

Kerosene 251 108

Mercury 295 127

Nitrogen 199 86

Octane 298 128

Oxygen 214 92

Propane 428 184

Propylene 342 147

Propylene glycol 914 393

Sulphur 1510 650

Toluene 351 151

Turpentine 293 126

Water 2257 970.4

* 1 kJ/kg = 0.43 Btu/lbm = 0.24 kcal/kg

Latent heat of evaporation at atmospheric pressure.

[/color]

nice table dude , dont know if my thoughts are relivant but would methanol still vapourise at high pressure.

as pressure in plenum rises (presumably to 2-3bar)the evaporation temp of fuel should rise too if you dont get high enough for fuel vapourisation temp in the (pressurised)intake the latent heat absorbtion during vapourization wouldn t happen.

nice results and setup, im assuming the dyno graphs were engine dyno? looked at a dyno dynamics engine dyno a few weeks back but id love to get my hands on a superflow item.... very nice.

good luck with the car and i hope you hurt some of the ego's out there :thumbsup:

Guest snotass
Last i heard it was supposed to be ready for the last hi tech titles (drag meeting) here in Perth, but the torque convertor didnt arrive in time and now the drag season is finished so its wait till late in the year now unless theres a test and tune in the mean time. This is just info i read on another forum so dont qoute me on this :)

You heard right unique 1, may i ask which forum you may have read this on please?The TCE converter is on it's way to as we speak, they simply got "bogged" down with a heavy work load being the end of the season and all.

Guest snotass
nice results and setup, im assuming the dyno graphs were engine dyno? looked at a dyno dynamics engine dyno a few weeks back but id love to get my hands on a superflow item.... very nice. Engine dyno and no inflated values, if anything under rated.

good luck with the car and i hope you hurt some of the ego's out there :).We will and thanks for the support

You heard right unique 1, may i ask which forum you may have read this on please?The TCE converter is on it's way to as we speak, they simply got "bogged" down with a heavy work load being the end of the season and all.

Antilag.com from smiley "datsqik" (i think thats how its spelt).

Guest snotass
Antilag.com from smiley "datsqik" (i think thats how its spelt).

Yeh your correct as i spoke to Smiley from Datsqik Hardcore Japengines today , smiley is actually my head mechanic and the builder and tuner of my engine . Great value and a very cluey chap, has been paying with Turbo charged applications before 75% of current players were even born.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...