Jump to content
SAU Community

Recommended Posts

Gents,

Sat 13th December is the day. $100 buys you 8 hours of drift fun at the Eastern Creek skidpan and figure 8 wet track. We need 40 people to make this fly and the numbers look fine from the interest post.

What will you need? a roadworthy car, long sleeves and pants non-flammable. No Helmet (to be confirmed!)

What will you get? 1min flat out drift on the two circuits every 20-min. An instructor will be on hand to give advice and help out with control.

Starts 9am and finishes at 5pm. Food and drinks will be available at the creek.

For those of you who are only interested in the 1/2 day please PM me and don’t use this post. I will work something out with Dave once I have the numbers.

No deposit is needed as wet weather only makes the day more fun, but please, only post up if you are 100% confirmed, if we don’t get the numbers then Dave will not run this even again and we will loose out in the long run.

Any questions let me know.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/26149-drift-day-sat-13th-december-at-ec/
Share on other sites

  • Replies 188
  • Created
  • Last Reply

Top Posters In This Topic

All,

Bad news Dave just went to book the pans only to find out it was booked by someone yesterday. I will now change the date to the Sat 13th Dec.

Blitz,

Can you please change the Date in the post.




  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...