Jump to content
SAU Community

Recommended Posts

Hi guys,

Ive been going through the G35Driver site and see lots of cars with Wheel spacers, i thought it would be a nice touch since im a little strapped for cash i think it would be a good/effective mod.

Firstly i was in AutoBarn today and saw 10mm spacers hanging for around $30bucks a pair, i asked and he said they were universal, which is a down point already, but i wanted to know if anyone had them, what they look like and where you got them from in Australia?

Thanks!

Iv used wheel spacers on my old 180sx although that was only because my wheels were touching the R33 4 pot callipers. One thing to remember though using slip on spacers is going to place more load on the end of the wheel studs. Having said that I went to a few drift and sprint days without any issues.

Its also a defect to have spacers as well

my wheels are stock so they don't attract a lot of attention, plus i don't think our V35s are completely on the police radars.

so where did you get your spacers from?...and were they specific to your vehicle?

erm.. u can get it easy, but just remind u, it is not a problem with cops that u should be worried, it's insurance.

SAU do got a lot of traders, i believe there must be someone/shop selling..

SUPPORT SAU TRADERS!! (i think they do pay some sort for our benefit?)

i bought the ICHIBA Spacers from the USA from one of the websites which sell the car parts. ended up costing me about $180 AUD landed at the time.

These are high quality spacers.

I got the 10mm Slip on hubcentric spacers which also come with the correct length wheel studs. they are very safe and there is no vibration whatsoever at high speeds. they are made of a lightweight magnesium alloy. they are packaged and look exactly the same as a set of H&R spacers i bought some years ago. they are not universal but specifcally drilled for the 5 x 114.3 and also the wheel studs are 1.25mm which needed to be specified.

all in all excellent purchase, would def. recommend them to anyone who wants slip on spacers.

i bought the ICHIBA Spacers from the USA from one of the websites which sell the car parts. ended up costing me about $180 AUD landed at the time.

These are high quality spacers.

I got the 10mm Slip on hubcentric spacers which also come with the correct length wheel studs. they are very safe and there is no vibration whatsoever at high speeds. they are made of a lightweight magnesium alloy. they are packaged and look exactly the same as a set of H&R spacers i bought some years ago. they are not universal but specifcally drilled for the 5 x 114.3 and also the wheel studs are 1.25mm which needed to be specified.

all in all excellent purchase, would def. recommend them to anyone who wants slip on spacers.

Ah, dumb question but what do you mean by 1.25mm studs?

sorry to change the topic a little..

just go my wheels and not sure if i need camber top to adjust a little. Any ideas guys?

they are 235/35/R19 front and 265/30R19 rear.. te37 bronze..

lowering with tein super street coilover..

sorry to change the topic a little..

just go my wheels and not sure if i need camber top to adjust a little. Any ideas guys?

they are 235/35/R19 front and 265/30R19 rear.. te37 bronze..

lowering with tein super street coilover..

Just quoting tire size is of no use to whether you need camber or not. Quote your wheel width and offsets will give us a better indication. Also if it's not rubbing your guards or fouling any other body part then you prob don't need any additional camber. I had super streets on my 34 and did not need camber tops as it was only a daily driver and did not scrub the guards. Hope that helps.

Just quoting tire size is of no use to whether you need camber or not. Quote your wheel width and offsets will give us a better indication. Also if it's not rubbing your guards or fouling any other body part then you prob don't need any additional camber. I had super streets on my 34 and did not need camber tops as it was only a daily driver and did not scrub the guards. Hope that helps.

sorry, bad at these.. front width 8.5, rear 9.5, offset +35. Now rubbing guard now and the coilover will b put on this saturday, but believe wont have rubbing.. If will, will just roll it that day.

wondering, super street can be set to comfy daily drive, rite?

Ah, dumb question but what do you mean by 1.25mm studs?

I believe its the diameter of the "bolt" on which you place your wheels...so the nuts which fasten your rims will fit!

hmm, "they have to be specified" i used to think it was a universal size.

I believe its the diameter of the "bolt" on which you place your wheels...so the nuts which fasten your rims will fit!

hmm, "they have to be specified" i used to think it was a universal size.

they have to be specified of course they do, because when you are buying these wheel spacers they are not universal.

they COME WITH LONGER WHEEL STUDS to replace your stock ones

if you get 1.5mm studs, your 1.25 stock wheel nuts wont fit

recently i bought some aftermarket wheel nuts (rays) and the guy gave me 1.5mm by accident, i had to take them back and get the 1.25mm because the 1.5 of course did not screw on properly at all.

they have to be specified of course they do, because when you are buying these wheel spacers they are not universal.

they COME WITH LONGER WHEEL STUDS to replace your stock ones

if you get 1.5mm studs, your 1.25 stock wheel nuts wont fit

recently i bought some aftermarket wheel nuts (rays) and the guy gave me 1.5mm by accident, i had to take them back and get the 1.25mm because the 1.5 of course did not screw on properly at all.

Okay thanks for that so wouldn't all our V35s be 1.25mm?

Cheers

Geoff

Okay thanks for that so wouldn't all our V35s be 1.25mm?

Cheers

Geoff

yeh they are all 1.25mm

all nissans are 1.25mm i think (dont hold me on that one)

the thing is just when u order these from overseas websites you have to state your thread size

ill show you the spacers at the meetup if your in sydney

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...