Jump to content
SAU Community

Recommended Posts

Hi man

All the parts i have are for r32 gtr i am wrecking a whole car (yes my baby)but it is ok as i bought another one last weekend in melbourne.

so are u after

2x gaurds,2x headlights,radiator,intercooler core,air con rad,air con fan,radiator support panel,frontbar with lip.

is this what you need?

Edited by NISSANGTS

atm will need front rio bar, radiator and headlights atm.

radiator support panel prob, will need that further inspected.

air con dont give 2 shits about lol, rip that shit out.

what size front mount you got? my old one was 600x300 from memory, my existing piping is fine.

wont need guards as they are fine and weren't damaged.

front bar is a possibility at this stage, depends if i can fix mine up.

Photo0047.jpg

Photo0048.jpg

Photo0050.jpg

Photo0051.jpg

atm will need front rio bar, radiator and headlights atm.

radiator support panel prob, will need that further inspected.

air con dont give 2 shits about lol, rip that shit out.

Hi Funz

pair of headlights

radiator

front reo

radiator support panel

gtr genuine intercooler

everything in good condition and i will deliver tas wide no charge

$1100.00

Hi Funz

pair of headlights

radiator

front reo

radiator support panel

gtr genuine intercooler

everything in good condition and i will deliver tas wide no charge

$1100.00

cheers mate, atm will prob take following:

headlights

radiator (gtr one is exact same as gtst?)

front reo

have sorted FMIC which is exact same size as my old one.

Radiator support panel just appears to be pushed back where bonnet latch is so can prob be pulled back out, anyone able to do this at all?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...