Jump to content
SAU Community

Recommended Posts

Hey Buddy!

Just helping you out in the future, if you want to organise a cruise, you can't just give a few hours notice, you gota plan it.

Atleast give a week or 2 notice and tell ppl in the thread whats gonna happen on the night.

Eg. Just a "Meet and Greet", or we all meet up and then go for a cruise or we meet up and goto dinner... Whatever...

Also to really get a meet going, speak to dezz, LEANBAC or GTS-T Sedan as they are well know for organising meets and are succsessful.

Basicaly:

Time / Date / Meeting Point (Location) / Event.

Remember you are telling the whole of VICTORIA (Melbourne in particular) ppl are from East or Westside some up North and some down South...

Cool! :D

Nt specifically targetting you here Sloane, but for the punters reading this, just note...

"cruise" is not the same as:

skids

skating

industrials

paddock bashing

minority bashing

burnouts

drive by chops

drags

ram raids

mountain runs

timed runs

rolling start runs

touge

dori dori

etc.

so if you're referring to any of those, don't organise or ask for them on here... but if you're not after any of those, and just looking for a good old fashioned catch up, yeah hook up with dezz or Leanbac and they'll tell you where the next meet n greet n eat is.

thanks for the feedback guys.

my apologies for not referring to those guidelines.

But yeh, as my earlier thread a while back I had mentioned i was new to the area so was looking for any greet and meets that may occur.

In particular thursday night as Ive got nothing to do so thought i'd ask the community.

anyway I will look out for any future events posted up if not I'll try and organise a nice meet N greet myself :D

Cheers

Sloane

Nt specifically targetting you here Sloane, but for the punters reading this, just note...

"cruise" is not the same as:

skids

skating

industrials

paddock bashing

minority bashing

burnouts

drive by chops

drags

ram raids

mountain runs

timed runs

rolling start runs

touge

dori dori

etc.

so if you're referring to any of those, don't organise or ask for them on here... but if you're not after any of those, and just looking for a good old fashioned catch up, yeah hook up with dezz or Leanbac and they'll tell you where the next meet n greet n eat is.

Apperently I'm not much of a hoon. What's a ram raid, dori dori, touge and drive by chops?

Apperently I'm not much of a hoon. What's a ram raid, dori dori, touge and drive by chops?

Ram raid is when you drive cars into shop windows and steal things.

Touge is driving on mountain passes a la InitialD. Dori dori is drift. Obviously you don't watch enough best motoring :D

NFI what drive by chops means.

Nt specifically targetting you here Sloane, but for the punters reading this, just note...

"cruise" is not the same as:

skids

skating

industrials

paddock bashing

minority bashing

burnouts

drive by chops

drags

ram raids

mountain runs

timed runs

rolling start runs

touge

dori dori

etc.

so if you're referring to any of those, don't organise or ask for them on here... but if you're not after any of those, and just looking for a good old fashioned catch up, yeah hook up with dezz or Leanbac and they'll tell you where the next meet n greet n eat is.

Quality

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...