Jump to content
SAU Community

Recommended Posts

Hey guys,

Got some things I really don't need lying around:

2 x R32 Tail-lights (White Surround, Ie Both Sides)

2 x R32 Windscreen Wiper Motors

1 x Passenger R32 GTSt Seat (On Rail)

1 x R32 GTR handbrake

Various Interior parts:

- Centre Console

- Part that goes around the dash cluster

- Part that goes around the centre console

And possibly (reluctantly)

1 x R32 GTR ABS unit

1 x R32 GTR Alternator

1 x R32 GTR Starter Motor

4 x R32 GTR standard Suspension (full set)

Just looking for expressions of interest on any of the above items. Give me some ballpark figures. You know what most of these parts are, but if you are interested I could get pics.

Thanks,

Rick

Link to comment
https://www.sau.com.au/forums/topic/26446-various-r32-gear/
Share on other sites

MADGT4, Check your PM.

This is really really crude, but I don't have any batteries for my digital camera so it'll do for now. Attached is a photo of a stock R32 GTR interior, and the red arrows point to the interior pieces I have.

These bits include the Centre console piece with the glovebox/openthing, also the panel that wraps up around the side of the cluster/etc, the top of the dash surround, with the dials for headlights etc, and also got 2 of the strips inside the door as pointed out.

Cobo_11: I noticed theres a smaller plastic piece that goes around the shifter boot, which unfortunately I don't have.

Link to comment
https://www.sau.com.au/forums/topic/26446-various-r32-gear/#findComment-560697
Share on other sites

Cobo_11: The parts I got (tried to point the arrow to) goes around the side, its a grey panel, not a black panel. Have a look on yours hopefully you can see the difference between them. I've got the panel that goes under the steering wheel on the pic, just above the carpet.

Pekatu: Sorry, don't have any aircon vents

ScarifieR: I do have that panel, its got the ashray on the back of the glovebox, as you can see on the pic.

Link to comment
https://www.sau.com.au/forums/topic/26446-various-r32-gear/#findComment-563019
Share on other sites

cobo_11: Wheres this sticker?

SacrifeR: Im not sure I really want to take the ashtray out, i'd rather sell the centre console complete, or hold onto it. If you still need one in a few months let me know :D

Link to comment
https://www.sau.com.au/forums/topic/26446-various-r32-gear/#findComment-568295
Share on other sites

I couldn't find them for cheaper than $300 a pair, so I think it'd be fair at around $120 for the seat. It would be difficult to freight. Needless I will take offers on all the items.

MADGT4 hasn't got back to me about the suspension, so its still avaliable.

Link to comment
https://www.sau.com.au/forums/topic/26446-various-r32-gear/#findComment-569863
Share on other sites

  • 2 weeks later...
  • 5 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...