Jump to content
SAU Community

Recommended Posts

Checked your oil and made sure the pump is working? We were cruising around in a friends car and it started ticking pretty loudly, we thought nothing of it, then 5 minute later we had a seized engine.

Not meant to scare you, but better to be safe than sorry!

did it all of a sudden come on or has it been a gradual sort of noise over the months/years... It could be a noisy lifter so maybe u should give it an oil flush when changing oils, otherwise maybe it could be the oil pump? Either way i'd check it out asap as rebuilds aren't cool.

Guys,

try the old screwdriver test. What you do is get a long/large screwdriver, with the engine running, CAREFULLY place the blade of the screwdriver against various parts of the engine or on the components bolted to the engine and then place your ear against the butt end of the screwdriver and listen for excessive noises. If you're unsure how loud the noise should be check the same spot on a mates car. Good way to isolate a noise to a certain area.

JUST BE CAREFULL !!!

The NVCS solenoid on my car goes spastic every now and again. Makes a great clicking sound, sounds similar to a popcorn machine at full tilt. Just by holding the back of the solenoid where the plug goes into it stops it, just too lazy to fix this on a more permanent basis.

Originally posted by DoughBoy

just too lazy to fix this on a more permanent basis.

hahahaha i like ur style:D

the ticking whilst cold , as said above is the lack of oil in the top end so lifters will tick.

not too sure with skylines but in the vl , hydraulic lifters always after years of use seem to tick , and take a while to "pump up" when cold.

a water pump most likely wont make noise at idle , it is more a load thing , hold it at 3k revs , in neutral , and listen for a definate clunky noise , more evident than a tick noise.

sounds similar to a thrown big end bearing.

injectors make a constant tick tick tick , be it hot or cold , day or night.

injectors/lifters tick (probably a dupe but i cbf reading all the posts :()

mine does that fairly audible on idle with bonnet popped and head in engine bay, but if its from in the car whilst accelerating, more than likely u got a missing exhaust manifold bolt like me, dont worry about it unless it starts getting worse or the cars feeeling crap/doing something crappily noticeable :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...