Jump to content
SAU Community

Recommended Posts

Dan is apparently not able to attend but offered to assist in getting deposits to Motoconcepts (correct me if I am wrong dude).

So just a few days after spending 24 hours up in bathurst watching that lot have fun we can head out to the creek for a bit of a drive.

Who is interested...

carlo

slo200

mmmgtir

kinks?

Oz GTR97V

Mr R32 M-Spec ?

fatz

I'm thinking more like RE540's although to get a set of RE540's + 17x8" rims is gonna cost me like $2200 where as a set of stock 16's with some average rubber will cost me like $750 hrmm decisions.

benm, good news, you can get a set of 17s with re55s on them from me for $2000.

Or you can have my whole car for 27k - Guaranteed 1.55s performance :D

Sorry, can't make this one :D

  • 2 weeks later...


  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...