Jump to content
SAU Community

Gtr Burnouts

UWISSH!
 Share

Recommended Posts

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
Deano45 Rising Star

Deano45

Posted
Posted
No exactly what the question is...

Doing a burnout? - Drive around the water, backup onto the pad and apply noise.

Isolating the front wheels? - How about one of the Dirtmans 2wd/4wd switch and harnesses...

The 33GTR attessa system if different and you can't just switch from 4wd to 2wd with a switch. You can use a torque split controller but this doesn't fully isolate the rear wheels and isn't good for the transfer case. The proper way to do it is to remove any pressure from the attessa system so that there is no transfer to the front wheels. examples of cars that do this is the heat treatments GTR and Godzilla Motorsports GTR that have a manual pump system to pressurize the transfer case.

There is some combo that you are meant to be able to do, to de-pressurise the transfer case for towing (can't remember it off the top of my head) but it would be a pain in the ass to do on the drag strip.

Link to comment
https://www.sau.com.au/forums/topic/264884-gtr-burnouts/#findComment-4622326
Share on other sites
bigmikespec Veteran

bigmikespec

Posted
Posted

For an R33/R34 why don't you put in a 3 position solenoid valve in the pressure line that goes to the transfer case and flick a switch to divert all the oil back to the reservior... hence no pre-load? Or is it a mechanical pre-load some how?

Link to comment
https://www.sau.com.au/forums/topic/264884-gtr-burnouts/#findComment-4622549
Share on other sites
R 2 THE J Rising Star

R 2 THE J

Posted
Posted

To put the GTR into rear wheel drive is simple.

My R33 Service Manual states:-

There are 2 Methods to change the drive mode to 2WD setting.

1. Remove air evacuation connector, and depress the brake pedal 5 times within 10 seconds after placingthe ignition switch to ON posititon. At the same time the 4WD warning lamp will flash in the meter panel (twice in a second) to indicate it's in 2WD mode. To return the the vehicle drive mode to 4WD mode, place the ignition switch to OFF position and connect air evacuation connector.

2. Remove front propeller shaft.

Can anybody confirm this works??

post-47546-1243496825_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/264884-gtr-burnouts/#findComment-4622599
Share on other sites
UWISSH! Grand Master

UWISSH!

Posted
  • Author
Posted

shit seems like its all to complicated, was hoping for a quick fix way.

ill be doing heaps of passes on the day so hopefully they will warm up due to the mount of use they are getting but i know they wont be perfect.

and yes i do have a torque splitter and already new that the 2wd/4wd switch doesnt work for r33's

Link to comment
https://www.sau.com.au/forums/topic/264884-gtr-burnouts/#findComment-4622688
Share on other sites
Deano45 Rising Star

Deano45

Posted
Posted
For an R33/R34 why don't you put in a 3 position solenoid valve in the pressure line that goes to the transfer case and flick a switch to divert all the oil back to the reservior... hence no pre-load? Or is it a mechanical pre-load some how?

I haven't really looked into it, but something like that could work using a solenoid as I think it pressurizes it when you turn the ignition to acc. Maybe a switch could be rigged up to activate a solenoid to block the line to the transfer case before the car is turned on?

Link to comment
https://www.sau.com.au/forums/topic/264884-gtr-burnouts/#findComment-4623106
Share on other sites
bigmikespec Veteran

bigmikespec

Posted
Posted
I haven't really looked into it, but something like that could work using a solenoid as I think it pressurizes it when you turn the ignition to acc. Maybe a switch could be rigged up to activate a solenoid to block the line to the transfer case before the car is turned on?

Yeah I would not block it just return it to the reservior, so the ATESSA ecu can do what ever it wants however the transfer case sees no oil hence does not engage 4WD. Not sure if it is that simple.

Link to comment
https://www.sau.com.au/forums/topic/264884-gtr-burnouts/#findComment-4623209
Share on other sites
  • 2 months later...
timsr33 Community Regular

timsr33

Posted
Posted
To put the GTR into rear wheel drive is simple.

My R33 Service Manual states:-

There are 2 Methods to change the drive mode to 2WD setting.

1. Remove air evacuation connector, and depress the brake pedal 5 times within 10 seconds after placingthe ignition switch to ON posititon. At the same time the 4WD warning lamp will flash in the meter panel (twice in a second) to indicate it's in 2WD mode. To return the the vehicle drive mode to 4WD mode, place the ignition switch to OFF position and connect air evacuation connector.

2. Remove front propeller shaft.

Can anybody confirm this works??

post-47546-1243496825_thumb.jpg

i can confirm that it works a treat used it on a dyno and for skids many times

Link to comment
https://www.sau.com.au/forums/topic/264884-gtr-burnouts/#findComment-4762137
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • Duncan
      Who has a Infiniti Q60, Q50 (V37)?

      By Duncan · Posted

      The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...