Jump to content
SAU Community

Modding My 98s1 Rs4

Mickya

By Mickya,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Mickya Enthusiast

Mickya

Posted
Posted

I have a 98 s1 rs4 stagea and have decided to do afew mods with the money from K Rudd and what i have in my account.

it's an rb25, non neo with no work done as yet.

so i have decided to get a 3inch turbo back exhaust and front mount and then tune once these are on.

my mate suggested to put on a bigger turbo, am i able put this on a stock engine without hurting and having to strengthen it?

what other mods are there that aren't too costly that'll still give me more POWER!

any help appreciated, cheers,

Mick

Link to comment
https://www.sau.com.au/forums/topic/264936-modding-my-98s1-rs4/
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Spend some time reading through this forum before parting with your cash.

If you have the money for a bigger turbo then you can make sure your 3in system is compatible with it. The front mount will help with a bigger turbo (won't give any power gain otherwise). You won't be able to "tune" the engine with the stock ecu so if you have the money you should get a Vipec/Link ecu. With less money you could get an Apexi SITC and SAFC.

Your ten year old fuel pump could struggle to keep up so as insurance you should get a new, better pump (e.g. Walbro or Bosch). An electronic boost controller ( I recommend the Jaycar IEBC but there are others) will help build an maintain boost.

By now you should be looking to upgrade your suspension and brakes - its all in this forum in the DIY and other threads.

How much power can your stock engine take? Seems to depend partly on how you treat it but all of the above should be OK at around 220 - 250AWKW depending on which turbo you go with and the quality of the tune.

_Ryan_ Grand Master

_Ryan_

Posted
Posted

shift kit

alignment bushes(i wouldnt do shocks/springs til the stock shocks die)

TBE with highflow cat

S2/R34 SMIC

EBC(or bypass stock solenoid)

SAFC or ECU

Racebrakes RB74 or Endless SSS pads

i wouldnt bother with a turbo until all of the above are done

southern_tango Proficient

southern_tango

Posted
Posted

As told before ,if you are going to change turbo check comp with the dump pipe ,high flow metal cat converter is a must as high flow panel filter or pod filter...after that EBC so maybe you can get up to 14-16 psi depending turbo(don't try it with the stock one) + SAFC to control fuel air.

After that for sure you will atrt thinking about handling and braking ,herre you can go two ways first as Ryan said endless pads +braided lines or second change to R33 (or R34) rotors and calipers( you can allways go with brembos ...but pricy) and maybe upgrade sway bars for some whiteline ones

You will find lots of ideas in this forum,so check around and save yourself some headhaches (or just ask there'll be somebody happy to answer and help)

Good luck and have fun...

_Ryan_ Grand Master

_Ryan_

Posted
Posted
As told before ,if you are going to change turbo check comp with the dump pipe ,high flow metal cat converter is a must as high flow panel filter or pod filter...after that EBC so maybe you can get up to 14-16 psi depending turbo(don't try it with the stock one) + SAFC to control fuel air.

After that for sure you will atrt thinking about handling and braking ,herre you can go two ways first as Ryan said endless pads +braided lines or second change to R33 (or R34) rotors and calipers( you can allways go with brembos ...but pricy) and maybe upgrade sway bars for some whiteline ones

You will find lots of ideas in this forum,so check around and save yourself some headhaches (or just ask there'll be somebody happy to answer and help)

Good luck and have fun...

my car stops on a dime... once there is heat in the pads, you feel like time is slowing!

come for a spin before changing calipers, unless you are just doing it for ease of pad/rotor choice, but i doubt R33 calipers will fit under s1 stockie rims

RBPOWA-(TJ) Grand Master

RBPOWA-(TJ)

Posted
Posted

any order you want ...

want power first ?

want handling first ? stagea's handle great stock, but can always use some extra tweeking :P

but cooling should be the next step once the box is working harder, due to engine mod's or yourself just trashing it :D

66yostagea Grand Master

66yostagea

Posted
Posted

R34 smic with air scoop, cold air deflector, hi flow panel filter. Thats what I have on my auto. With JJ bellmouth dump X Force cat and 3'' cat back with new resonator and 3" cannon. Power increase is quite noticeable and the bottom end will stand it.

BTW big Kev's money wont pay for all of it.

southern_tango Proficient

southern_tango

Posted
Posted
BTW big Kev's money wont pay for all of it.

That's tue,sad but true, and things are going even worst,looks like like all import stuff is about to go up in price...so Mickya mind your mods because you need some balance on them,simple power upgrades like hi flow filter (maybe smic/fmic)+ exhaust(dumpy+cat+catback) is one thing,but changing turbo and make it work perfect involves ecu re-tune + bigger fuel pump + inyector +etc ,is another +++labor on top(except you do it your self...)so good luck in your project... :laugh:

Mickya Enthusiast

Mickya

Posted
  • Author
Posted

yeh krudd will not cover this, but i have abit stored away in my piggy bank :sick: and my dad is a mechanic, although this area isn't his forte he will (hopefully) be able to help out in the labor department. cheers guys

That's tue,sad but true, and things are going even worst,looks like like all import stuff is about to go up in price...so Mickya mind your mods because you need some balance on them,simple power upgrades like hi flow filter (maybe smic/fmic)+ exhaust(dumpy+cat+catback) is one thing,but changing turbo and make it work perfect involves ecu re-tune + bigger fuel pump + inyector +etc ,is another +++labor on top(except you do it your self...)so good luck in your project... :laugh:
_Ryan_ Grand Master

_Ryan_

Posted
Posted
shift kit

alignment bushes(i wouldnt do shocks/springs til the stock shocks die)

TBE with highflow cat

S2/R34 SMIC

EBC(or bypass stock solenoid)

SAFC or ECU

Racebrakes RB74 or Endless SSS pads

i wouldnt bother with a turbo until all of the above are done

also a turbotech EBC from ebay is an alternative to an EBC too... 40AUD from ebay

I would follow my list :laugh:, i did(roughly) (my exhaust is JJR bellmouth dump, JJR catco cat, and a custom catback- its legal and seems to flow fine)

southern_tango Proficient

southern_tango

Posted
Posted
yeh krudd will not cover this, but i have abit stored away in my piggy bank :D and my dad is a mechanic, although this area isn't his forte he will (hopefully) be able to help out in the labor department. cheers guys

No,problem you have all the hardware/parts change cover now... :( (it's like any other car,for a mechanic)

66yostagea Grand Master

66yostagea

Posted
Posted
No,problem you have all the hardware/parts change cover now... :( (it's like any other car,for a mechanic)

Except when you have to remove/replace turbo. You need fingers like forceps and a pack of bandaids.LOL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      RH9 R32 GTR Build Thread

      By soviet_merlin · Posted

      Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Dose Pipe Sutututu
      RH9 R32 GTR Build Thread

      By Dose Pipe Sutututu · Posted

      Curious to see how the SpeedTek stuff holds up
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Ozdavroz
      Dumb rich kid tries modding for the first time

      By Ozdavroz · Posted

      Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      I don't believe I posted pictures of the second oil pump pickup I added so here they are. Data shows it gets oil pressure up to the relief pressure much earlier in the RPM. Is that important? Not likely... This was just another attempt to fix the bearing issues.   I also heavily opened up the inlet to the pump since it now had to flow oil from two pickups. I believe the diameter increased about 1/8".
×
×
  • Create New...